Operation Manual

Table Of Contents

0ALJ-03F

Specifying Destinations in an LDAP Server (Fax)

If your office has an LDAP server installed, you can use the destinations registered in the server. To specify

destinations, access an LDAP server via the machine, and then search for a destination.

NOTE

You need to specify the settings for connecting to an LDAP server beforehand.

Registering LDAP Servers (MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw Only)

Press .

Use / to select <Specify from LDAP Server>, and press .

Select the LDAP server you are using, and press .

Select the search criteria, and press .

Personal names, fax numbers, e-mail addresses, organization names, and department names are available criteria for searching

destinations. Multiple search criteria can be specified at the same time.

Specify the search criteria using the numeric keys, and press <Apply>.

The following screen shows an example for when <Name> is selected in step 4 to search by personal name.

Pressing <A/a/12> toggles the input modes (except for searching by fax number).

To specify multiple search criteria, repeat steps 4 and 5.

Select <Search Method>, and press .

㻝㻡㻜㻌㻛㻌㻢㻣㻢