Operation Manual

Table Of Contents

0ALJ-04K

Switching 1-Sided and 2-Sided Printing (MF8580Cdw / MF8550Cdn /

MF8540Cdn Only)

If you are using the MF8580Cdw / MF8550Cdn / MF8540Cdn, you can make both 1-sided and 2-sided

printouts. The default setting is [2-sided Printing]. Change the setting as necessary.

NOTE

2-sided printing may not be available with some sizes and types of paper. Paper

[Basic Settings] tab

Select [1-sided Printing] or [2-sided Printing] in [1-sided/2-sided/Booklet Printing] Select the

position to bind in [Binding Location]

[OK]

[1-sided/2-sided/Booklet Printing]

Select [1-sided Printing] or [2-sided Printing].

NOTE:

For [Booklet Printing], see

Printing Booklet (MF8580Cdw / MF8550Cdn / MF8540Cdn Only).

[Binding Location]

Specify the position to bind the printouts with a binding tool such as a stapler. Printing orientation will be changed depending on

the specified binding position. To specify the margin width for the binding position, click [Gutter].

[Long Edge [Left]]

Prints images in such a way that the printed pages are opened horizontally when bound.

[Short Edge [Top]]

Prints images in such a way that the printed pages are opened vertically when bound.

[Gutter]

Specify a binding margin.

㻞㻜㻜㻌㻛㻌㻢㻣㻢