Operation Manual

Table Of Contents
0ALJ-00A
Loading Paper
This section describes how to load A4 size paper into the paper drawer. Read the precautions in Maintenance and
Inspections before loading paper.
IMPORTANT
When loading paper other than A4 size paper
The initial setting screen is displayed the first time you turn ON the machine. Follow the on-screen instructions to load the paper.
Note that only A4 size paper can be loaded in the machine at this time. If you want to load a different size paper, complete the
initial settings first, and then change the paper size and type.
Loading Paper in the Paper Drawer
Specifying Paper Size and Type
Pull out the paper drawer.
IMPORTANT:
Make sure to hold the paper drawer with both hands, and pull it out gently. Otherwise, you may damage the paper drawer by
dropping it, if it slides out too easily.
Slide the paper guides apart.
Press the lock release lever to slide the paper guides outward. On the MF8280Cw / MF8230Cn, there is no lock release lever for
the side paper guides.
Load the paper so that the edge of the paper stack is aligned against the rear side of the paper drawer.
Fan the paper stack well, and tap it on a flat surface to align the edges.
IMPORTANT:
Do not exceed the load limit line when loading paper
Make sure that the paper stack does not exceed the load limit line (
). Loading too much paper can cause paper jams.
1
2
3
㻞㻤㻌㻛㻌㻢㻣㻢