Operation Manual

Table Of Contents

0ALJ-00W

Selecting the Receive Mode

Select the receive mode that suits your intended use beforehand ( Deciding Which Fax Receive Mode to Use).

NOTE

If you previously selected <Set Up Later> on the fax setup screen ( Registering the Fax Number and Unit Name), press

<Fax Settings> <Fax Setup Guide> to display the fax setup screen.

Press <Next>.

The screen shown here is displayed after the unit name has been registered ( Registering the Fax Number and Unit Name).

Select the receive mode that suits your intended use.

Use / to select <Yes> or <No>, and press to select the receive mode.

NOTE:

You may be able to manually set a receive mode other than those described below, depending on your country or region.

Receiving Faxes

To set the receive mode to <Auto>

To set the receive mode to <Fax/Tel Auto Switch>

To set the receive mode to <Answering Machine>

To set the receive mode to <Manual>

Press <Apply>.

Continue to

Connecting the Telephone Line

㻠㻣㻌㻛㻌㻢㻣㻢