Operation Manual

Table Of Contents

This adjustment maintains the optimized status that was acquired by <Full Adjust>. Note that you cannot perform this adjustment while

performing some functions, including, scanning, and printing. If the result of this adjustment is not satisfactory, perform <Full Adjust>.

This adjustment may be automatically performed after you replace a toner cartridge.

NOTE

This adjustment is not available when <Only Continue Black & White Printing> is selected on the screen displaying the message

<End of Toner Cart. Lifetime>.

Press .

Use / to select <Adjustment/Maintenance>, and press .

Select <Auto Adjust Gradation> <Quick Adjust>.

Press .

Adjustment starts. In approximately 1 to 2 minutes, the adjustment is finished.

Press to close the menu screen.

NOTE

You can set the machine to perform this adjustment automatically after the power is turned ON.

Auto Correction Settings

This adjustment improves the result of copies and printing from a USB memory device. For correcting copy images, an adjustment image

will be printed and scanned. Note that you cannot perform this adjustment while performing some functions, including, scanning, and

printing.

NOTE

This adjustment is not available when <Only Continue Black & White Printing> is selected on the screen displaying the message

<End of Toner Cart. Lifetime>.

Press .

Use / to select <Adjustment/Maintenance>, and press .

Select <Auto Adjust Gradation> <Adjust Copy Image>.

Check that the size and type of paper displayed on the screen is loaded in the machine, and press .

Quick Adjust

Adjust Copy Image

㻢㻜㻞㻌㻛㻌㻢㻣㻢