Operation Manual

Table Of Contents

0ALJ-01S

Registering Default Paper Settings for the Manual Feed Slot

You can register default paper settings for the manual feed slot. Registering default settings can save yourself the effort of having to

specify the settings each time you load the same paper into the manual feed slot.

NOTE

After the default paper setting is registered, the paper setting screen is not displayed when paper is loaded, and the same setting

is always used. If you load a different paper size or type without changing the paper settings, the machine may not print

properly. To avoid this problem, disable the default setting by selecting <Off> in step 3, and then load the paper.

Press (Select Paper/Settings).

If the <Select Paper> screen shown below is displayed, use / to select <Paper Settings>, and press .

Select <Multi-Purpose Tray>, and press .

Select <Set Details>, and press .

If <Set Details> cannot be selected, select <On>, press , and then perform steps 1 and 2 again.

Select the paper size, and press .

Registering a custom paper size

Select <Custom>, and press .

Specify the length of the <X> (shorter) side.

㻤㻤㻌㻛㻌㻢㻣㻢