i450 SIMPLIFIED MANUAL 1 2 PRODUCT LIST PRODUCT SPECIFICATIONS 3 4 5 6 7 ERROR CODE SERVICE MODE EXTERNAL VIEW / PARTS LIST TROUBLESHOOTING FLOWCHART SERVICE INFORMATION QY8-1386-010 Rev 00 May 7, 2003 Canon Inc 1
1. PRODUCT LIST 1.1 Main Units Product name Canon Bubble Jet Printer i450 PIXUS 450i 1.
2. SPECIFICATIONS 2.1. Printer Specifications Type Paper feeding method Resolution Throughput (Target value) Printing direction Print width Line feed speed Interface ASF stacking capacity Paper weight Detection functions Acoustic noise Environmental requirements Power supply External dimensions Weight Related standards Serial number location Remaining ink amount detection Print head alignment Desktop serial color bubble jet printer Auto sheet feed (no manual feeding) 4,800 dpi x 1,200 dpi (Max.
2.2.
3. ERROR LIST 3.1. Errors by LED Blinking in Orange User recoverable errors LED blinking in Panel display Error Code Error 2 times 301 1000 No paper. 3 times 302 1300 Paper jam. 6 times 402 1401 Solution orange Set the paper, and press the Resume/Cancel button. Remove the jammed paper, and press the Resume/Cancel button. If the error is not resolved, check that no foreign material is inside the printer. Install the print head, and close the access cover.
3.2. Errors by LED Blinking in Orange and Green Alternately, or Lit in Orange User unrecoverable errors LED alternate blinking in Panel display orange and green 2 times 802 Error Code 5100 4 times 804 5C00 6 times 806 5400 7 times 807 5B00 8 times 808 5200 9 times Lights in orange 809 No display 6800 6800 Error Solution Carriage error 1. Check that no foreign material is inside the printer. 2. Replace the timing slit strip film. 3. Replace the purge unit. 4.
4.2. Service mode operation procedures 1) Close the access cover, and turn off the printer. While pressing the Resume/Cancel button, press and hold the Power button. (The LED lights in green to indicate that a function is selectable.) 2) While holding the Power button, release the Resume/Cancel button. 3) While holding the Power button, press the Resume/Cancel button 2 times, and then release the Power and Resume/Cancel buttons. (In the operation panel, “02” will be displayed.
4.3. Service test print After repair, print the service test print, and confirm the following items: - Check 1, top of form accuracy: - Check 2, EEPROM information: - Check 3, nozzle check pattern: - Check 4, vertical straight lines: - Check 5, halftone: The line shall be within the paper. Destination and waste ink counter shall be checked. Ink shall be ejected from all nozzles. The lines shall not be broken. There shall be no remarkable streaks or unevenness.
4.4. EEPROM information contents On the EEPROM information print, the printer usage conditions can be confirmed. Refer to the sample print given below. 1 2 3 4 5 6 7 8 9 10 11 12 PIXUS 470PDP=V1.00 Destination=02 D=004.8 Page=00562 CH=0002 Bk(00) Cl(00) HeadT Bk=25.5 HeadT C=25.0 EnvT=30.
5.
6. TROUBLESHOOTING FLOWCHART 6.1. Printer Main Unit Troubleshooting Flowchart (how to printer operation confirmation when refurbishing) Power ON Error displayed? No Yes Open access cover, Error displayed? No Yes Connect to computer < Service test pattern check items of > (Refer to the attached print sample.) Service test pattern *Refer to 4. SERVICE MODE 1. Ink non-ejection: 2. Top margin: 3. Line: 4.
6.2. Print Head Troubleshooting Flowchart (print head operation confirmation) Connect to computer *Refer to 4. SERVICE MODE Nozzle check pattern Yes Correct? No Head cleaning *Refer to 4. SERVICE MODE Nozzle check Yes Correct? No Head refreshing *Refer to 4.
7. Service Information 7.1 Whole Unit Replacement When the unit is exchanged as a Whole Unit (WHOLE UNIT, W/O POWER SUPPLY UNIT: 0023U60701 , take the following procedures: 1. 2. 3. 4. Remove the AC adapter from the printer returned from the user. Install the removed AC adapter in the whole unit. Perform destination setting. (Refer to “4. SERVICE MODE” for details.