i470D Direct Printing Guide

Replacing an Ink Tank
36
5 Reset the ink counter.
6 Close the front cover.
Important After replacing an ink tank, be sure to reset the ink counter with the front
cover open.
The remaining ink volume display on the operation panel is displayed
properly only if the ink counter is reset.
Note
If you have replaced both black and color ink tanks, press the cursor buttons
and after both ink tanks have the mark set above them, press the Set
SetSet
Set button.
Note
Resetting the Ink Counter in the Maintenance Mode
If you have closed the front cover after replacing an ink tank, reset the ink
counter in the maintenance mode as described below.
1. Press the Maintenance
MaintenanceMaintenance
Maintenance button.
2. Press four times to display 05
0505
05.
Next, press the Set
SetSet
Set button. Then,
appears above the ink tank on the
operation panel.
3. Using the cursor buttons, locate
above the replaced ink tank.
Next, press the Set
SetSet
Set button.
A full ink tank icon appears under
and the counter is reset.
If you have replaced both black
and color ink tanks, reset the ink
counters of both ink tanks in the
same manner as above.
4. Press the Maintenance
MaintenanceMaintenance
Maintenance button.
Now you are finished with resetting of the ink counter.
(2) Press the Set
SetSet
Set button.
A full ink tank icon appears under and the
ink counter is reset.
(1) Using (cursor buttons), locate above
the ink tank you replaced.