i470D Direct Printing Guide

Troubleshooting

TroubleshootingTroubleshooting

Troubleshooting

Let’s take a look at countermeasures against the troubles that may occur during use of the

printer.

z “An Error Message is Displayed on the Operation Panel” on page 38

z “Ink does not come out/ Printing is Blurred/ Colors are Wrong/ White Streaks” on

page 40

z “Cannot Print Properly from the Digital Camera” on page 41

z “An Error Message is Displayed While Using the Photo Viewer” on page 42

An Error Message is Displayed on the Operation Panel

 An Error Number is Displayed.

If an error number is displayed on the operation panel, take the corresponding countermeasure

described below.

Note

Here, we will discuss errors indicated on the operation panel, problems that

might occur during direct printing from the digital camera, and problems that

are also likely to occur while using the Photo Viewer. If you cannot find the

symptom corresponding to a certain problem, refer to the User’s Guide.

Error Number/Problem Try This

102

102102

102

The paper thickness lever position is wrong.

Setting the paper thickness lever at the correct position will start

printing.

Pressing the Cancel

CancelCancel

Cancel button will stop printing.

202

202202

202

The waste ink tank is almost full.

Press the Resume

ResumeResume

Resume button to recover from the error.

You can print images for a while but you cannot print any more image

when the waste ink tank becomes full. Contact the Customer Care

Center.

301

301301

301

There is no paper or paper cannot be fed.

Load paper and press the Resume

ResumeResume

Resume button.

Error number