i560_QSG_US.
i560_QSG_US.book Page ii Tuesday, May 6, 2003 1:43 PM Canon i560 Series Desktop Photo Printer Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2003 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc.
i560_QSG_US.book Page 1 Tuesday, May 6, 2003 1:43 PM Contents Contents Basic Printing Turning on the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using Speciality Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
i560_QSG_US.book Page 2 Tuesday, May 6, 2003 1:43 PM Basic Printing Basic Printing Note This Quick Start Guide describes some of the features of your i560 printer and how to use them. For more information, view the i560 User's Guide on the Setup Software & User's Guide CD-ROM, or use the online help within your printer driver interface: While in the printer's Properties window, press the F1 key, or click ? in the upper right corner.
i560_QSG_US.book Page 3 Tuesday, May 6, 2003 1:43 PM Basic Printing Loading Paper Print Media to Avoid Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the printer to jam or malfunction.
i560_QSG_US.book Page 4 Tuesday, May 6, 2003 1:43 PM Basic Printing 1 Flatten the four corners of the paper before loading it. Important When paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat. 2 Prepare to load paper. (1) Open and pull out the paper rest. (2) Open the cover and pull out the paper output tray completely.
i560_QSG_US.book Page 5 Tuesday, May 6, 2003 1:43 PM Basic Printing 3 Load the paper. Load Limit Mark Do not load beyond this Load Limit Mark. (1) Insert the paper into the auto sheet feeder with print side facing up. (2) Align the paper stack against the right side of the auto sheet feeder. (3) Pinch the paper guide and slide it against the left side of the stack of paper. Note z Do not stack more than 50 sheets in the paper output tray. z Do not touch the printed surface until the ink dries.
i560_QSG_US.book Page 6 Tuesday, May 6, 2003 1:43 PM Basic Printing Using Speciality Media Canon recommends that you use genuine Canon media to ensure optimal print quality.
i560_QSG_US.
i560_QSG_US.book Page 8 Tuesday, May 6, 2003 1:43 PM Basic Printing Printing with Windows Note 1 2 z The menu screens and dialog boxes that appear may vary, depending on the software application you are using. z The steps described in this manual are for printing in Windows XP. Create a document or open a file to print. Open the Printer Properties dialog box. (1) Select Print from the application software's File menu. (2) Ensure that Canon i560 is selected. (3) Click Preferences or Properties.
i560_QSG_US.book Page 9 Tuesday, May 6, 2003 1:43 PM Basic Printing 3 Specify the required settings. (1) Click Media Type to select the type of media loaded in the printer. (2) Click OK. Note 4 z From the Page Setup tab, select the correct document size to be printed. z To adjust Print Quality settings, select Custom and click Set on the Main tab. You can control the print quality in the Set Print Quality dialog box.
i560_QSG_US.book Page 10 Tuesday, May 6, 2003 1:43 PM Basic Printing Printing with Macintosh Note 1 2 z The menu screens and dialog boxes that appear may vary, depending on the software application you are using. z The steps described in this manual are for printing in Mac OS 9. Create a document or open a file to print. Select Paper Size. (1) Select Page Setup from the application software's File menu. (2) Select the desired paper size from the Paper Size pull-down menu. (3) Click OK.
i560_QSG_US.book Page 11 Tuesday, May 6, 2003 1:43 PM Basic Printing Note z When you select the type of document from the Print Mode pulldown menu, the document is printed in color and print quality suited to the characteristics of Media Type you have selected. Text: Select when printing documents consisting mainly of text. Graphic: Select when printing documents consisting mainly of graphs and graphics (illustrations) with strong color definition.
i560_QSG_US.book Page 12 Tuesday, May 6, 2003 1:43 PM Advanced Printing Advanced Printing Printing Photographs Directly from a Digital Camera Connecting a Canon digital camera with Bubble Jet Direct function to the printer allows you to print captured images directly without using a computer. Use the USB cable that came with your digital camera.
i560_QSG_US.book Page 13 Tuesday, May 6, 2003 1:43 PM Advanced Printing Printing from a Digital Camera 1 2 Ensure that the printer is turned on. Load the paper. (1) Load the media with the glossy surface facing up. (2) Align the media on the right. (3) Pinch the paper guide and slide it against the left side of the media. 3 Connect the printer and the digital camera. (1) Ensure that the digital camera is turned off.
i560_QSG_US.book Page 14 Tuesday, May 6, 2003 1:43 PM Advanced Printing (3) Press the SET button to display the Print menu. (4) Select Style and specify the Paper Size, Borderless or Bordered printing, and set Date Printing ON or OFF. (5) Specify a number of copies and select Print. (6) Press the SET button on the digital camera. Note z For the digital camera operation and troubleshooting, refer to your digital camera user's manual.
i560_QSG_US.book Page 15 Tuesday, May 6, 2003 1:43 PM Advanced Printing Accessing Printer Driver The Printer Properties dialog box can be opened from either within an application, or directly from the Windows Start menu. Note z This manual refers to Windows XP operation. The operations may vary depending on your operating system. z Depending on your application program, the command and menu names may differ, and there may be more steps involved in opening the Printer Properties dialog box.
i560_QSG_US.book Page 16 Tuesday, May 6, 2003 1:43 PM Advanced Printing Adjusting Print Quality for Photographs Improving Printed Images Two important factors control the quality and output of your printed images: Paper and Ink Using recommended Canon paper, speciality media, and inks for printing photographs can significantly improve the quality of your printouts. See the inside back cover for a list of Canon Specialty Papers and ink tanks for this printer.
i560_QSG_US.book Page 17 Tuesday, May 6, 2003 1:43 PM Advanced Printing To manually adjust Print Quality settings: 1 Open the Printer Properties dialog box. See"Opening the Printer Properties Dialog Box from Your Application Program" on page 15. 2 Select Custom in Print Quality, then click Set... to open the Set Print Quality dialog box. 3 Move the slide bar to adjust the Print Quality. 4 When the process is complete, click OK. 1 Open the Print dialog box.
i560_QSG_US.book Page 18 Tuesday, May 6, 2003 1:43 PM Advanced Printing To automatically optimize the image: Photo Optimizer PRO automatically adjusts the photographic image created with a digital camera. Use this feature to compensate for unsatisfactory color balance and over- or under-exposure before printing. 1 2 3 4 1 2 3 4 5 18 Open the Printer Properties dialog box. See"Opening the Printer Properties Dialog Box from Your Application Program" on page 15. Click the Effects tab.
i560_QSG_US.book Page 19 Tuesday, May 6, 2003 1:43 PM Advanced Printing To use Vivid Photo option: Vivid Photo intensifies background colors like fields, trees, oceans and skies, while maintaining natural skin tones in the images. Note In Windows Me, Windows 98 or Windows 95 If Background Printing has been disabled, the Vivid Photo function is not available. To use Vivid Photo, select the Vivid Photo check box on the Effects tab.
i560_QSG_US.book Page 20 Tuesday, May 6, 2003 1:43 PM Advanced Printing To reduce noise from images captured with a digital camera: Photo Noise Reduction function reduces noise from blue portions, such as the sky and dark portions of the images captured with your digital camera. Note In Windows Me, Windows 98 or Windows 95 If Background Printing has been disabled, the Photo Noise Reduction function is not available.
i560_QSG_US.book Page 21 Tuesday, May 6, 2003 1:43 PM Advanced Printing Saving and Recalling Driver Settings When you change printer driver settings for a specific print job, such as printing black and white photos, or printing documents with a special background, you can save and name these settings for future use on similar print jobs. 1 Open the Printer Properties dialog box. See "Opening the Printer Properties Dialog Box from Your Application Program" on page 15. 2 3 Click the Profiles tab.
i560_QSG_US.book Page 22 Tuesday, May 6, 2003 1:43 PM Advanced Printing 1 Open the Print dialog box. See "Printing with Macintosh" on page 10. 2 Click Apply. The Register Settings dialog box opens. 3 Register new printer driver settings. (1) Click Apply…. The New Setting Name screen opens. (2) Enter a name under which to register your settings. 4 5 Click OK. Click Close in the Register Settings dialog box. This registers your printer driver print settings.
i560_QSG_US.book Page 23 Tuesday, May 6, 2003 1:43 PM Advanced Printing Using Printer Driver Options Your printer driver will provide you with many features that allow you to print a wide range of images and documents. The illustrations below provide a basic introduction to the many features offered by your printer driver. Note For detailed descriptions of the printer driver functions, refer to the User’s Guide.
i560_QSG_US.book Page 24 Tuesday, May 6, 2003 1:43 PM Advanced Printing Using the Bundled Software The Setup Software & User’s Guide CD-ROM includes photo applications designed to edit the photographs taken by a digital camera and print them as photo-lab quality prints without standard white borders. Please use the application(s) suitable for your print purposes. Note z To install applications, refer to Easy Setup Instructions.
i560_QSG_US.book Page 25 Tuesday, May 6, 2003 1:43 PM Advanced Printing Printing Borderless Photographs with Windows This chapter describes the steps used to print from Easy-PhotoPrint included with your Setup Software and User’s Guide CD-ROM using the Borderless Printing mode.
i560_QSG_US.book Page 26 Tuesday, May 6, 2003 1:43 PM Advanced Printing (2) Click the [ ] [ ] button on the thumbnail of the photograph you want to print and specify the number of copies. Increases the number of copies. Displays the specified number of copies. Decreases the number of copies. 3 Select the paper. (1) Click the Paper Selection tab. (2) Select the size of the paper you use from Paper Size. (3) Select the type of the paper you use from Media Type. 4 Select the layout.
i560_QSG_US.book Page 27 Tuesday, May 6, 2003 1:43 PM Advanced Printing Printing Borderless Photographs with Macintosh This chapter describes the steps used to print from Easy-PhotoPrint* included with your Setup Software and User’s Guide CD-ROM using the Borderless Printing mode. * If you use Mac OS 9.x, CarbonLib 1.3.1 or later must be installed.
i560_QSG_US.book Page 28 Tuesday, May 6, 2003 1:43 PM Advanced Printing (2) Click the [ ] [ ] button on the thumbnail of the photograph you want to print and specify the number of copies. Increases the number of copies. Displays the specified number of copies. Decreases the number of copies. 3 Select the paper. (1) Click the Paper Selection tab. (2) Select the size of the paper you use from Paper Size. (3) Select the type of the paper you use from Media Type. 4 Select the layout.
i560_QSG_US.book Page 29 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Printing Maintenance Replacing an Ink Tank When replacing an ink tank, check the model number very carefully. The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position. With this printer, ink tanks must be installed in the order of yellow, magenta, cyan and black.
i560_QSG_US.book Page 30 Tuesday, May 6, 2003 1:43 PM Printing Maintenance The following message appears when ink is empty. Printing will resume as soon as an ink tank is replaced and the front cover is closed. Empty ink tank Note The ink tank with [X] symbol is out of ink. Replace with a new ink tank. • Press the RESUME/CANCEL button to resume printing with an empty ink tank. When printing is finished, replace the ink tank immediately.
i560_QSG_US.book Page 31 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Replacing an Ink Tank When an ink tank runs out of ink, replace it using the following steps. 1 Ensure that the printer is on, and then open the front cover. The print head holder moves to the center. 2 Remove the empty ink tank. (1) Push the tab and remove the ink tank. Do not touch the lock lever: remove only the ink tank. Important z Handle ink tanks carefully to avoid staining clothing or the surrounding area.
i560_QSG_US.book Page 32 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Important z Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes and hands. z Do not re-attach the protective cap once you have removed it. z Once the protective cap is removed, do not touch the open ink port. 4 Install the ink tank. (1) Insert the ink tank in the print head holder. (2) Press on the "PUSH" mark until the ink tank snaps firmly into place. 5 Close the front cover.
i560_QSG_US.book Page 33 Tuesday, May 6, 2003 1:43 PM Printing Maintenance When Printing Becomes Faint or Colors are Incorrect When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the print head nozzles are probably clogged. Follow the procedures below to maintain the print head. Important Before maintaining the print head, check the following: z Open the front cover and make sure the ink tank contains ink. If it is out of ink, replace it.
i560_QSG_US.book Page 34 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles, and to verify print head alignment. Use this function when printed results are blurred or the color is incorrect. Note 1 2 Nozzle check pattern printing can be executed also from the printer itself. With the printer on, load a sheet of Letter paper in the printer.
i560_QSG_US.book Page 35 Tuesday, May 6, 2003 1:43 PM Printing Maintenance 1 With the printer on, load a sheet of Letter paper in the printer. 2 Open the Printer Utility dialog box. (1) Select Page Setup... in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 3 Print the Nozzle Check Pattern. (1) Select Test Print from the pull-down menu. (2) Click Nozzle Check. (3) When the confirmation message is displayed, click OK. See "Examining the Nozzle Check Pattern" on page 36.
i560_QSG_US.book Page 36 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Examining the Nozzle Check Pattern The nozzle check pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern output by the printer. Note If the ink tank runs out of ink, the nozzle pattern will be incorrect. And you will need to replace the tank. (1) (2) (3) (4) (5) (1) If lines are missing as in the illustration, run the print head cleaning procedure for Black 3eBK.
i560_QSG_US.book Page 37 Tuesday, May 6, 2003 1:43 PM Printing Maintenance (4) White vertical stripes in this pattern indicates the print head requires alignment. When vertical stripes appear See "Aligning the Print Head" on page 42. (5) Horizontal stripes in this patterns indicate the print head requires alignment. When horizontal stripes appear See "Aligning the Print Head" on page 42.
i560_QSG_US.book Page 38 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Print Head Cleaning Clean the print head if you suspect that the nozzles might be clogged. Cleaning the print head consumes ink, so perform print head cleaning only when necessary. Note 1 2 Print head cleaning can be performed also from the printer itself. Ensure that the printer is on. Hold down the RESUME/CANCEL button until the POWER lamp flashes once. Ensure that the printer is on. Open the Printer Properties dialog box.
i560_QSG_US.book Page 39 Tuesday, May 6, 2003 1:43 PM Printing Maintenance 1 2 Ensure that the printer is on. Open the Printer Utility dialog box. (1) Select Page Setup... in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 3 Start Print Head Cleaning. (1) Select Cleaning from the pulldown menu. (2) Click Cleaning. (3) Select the ink nozzles to be cleaned, and then click OK.
i560_QSG_US.book Page 40 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Print Head Deep Cleaning If print quality does not improve by standard print head cleaning, try print head deep cleaning, which is a more powerful process. Print head deep cleaning consumes ink, so perform this procedure only when necessary. 1 2 Ensure that the printer is on. Open the Printer Properties dialog box. See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on page 15.
i560_QSG_US.book Page 41 Tuesday, May 6, 2003 1:43 PM Printing Maintenance 1 2 Ensure that the printer is on. Open the Printer Utility dialog box. (1) Select Page Setup… in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 3 Start Print Head Deep Cleaning. (1) Select Cleaning from the pulldown menu. (2) Click Deep Cleaning. (3) Select the ink nozzles to be cleaned, and then click OK.
i560_QSG_US.book Page 42 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Aligning the Print Head Aligning the print head position allows you to print without shifts in the color registration. 1 2 With the printer on, load two sheets of Letter paper in the printer. Open the Printer Properties dialog box. See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on page 15. 3 Print the pattern. (1) Click the Maintenance tab. (2) Click Print Head Alignment.
i560_QSG_US.book Page 43 Tuesday, May 6, 2003 1:43 PM Printing Maintenance 4 Align the Print Head. (1) Look at the print out. From the patterns, select the most even, least irregular patterns and enter their numbers. (2) Enter the numbers. (3) Click OK. Note If it is difficult to pick the best pattern on Column H, pick the setting that produces the least noticeable vertical white stripes. Less noticeable white stripes More noticeable white stripes (4) Click Cancel.
i560_QSG_US.book Page 44 Tuesday, May 6, 2003 1:43 PM Printing Maintenance 1 2 With the printer on, load two sheets of Letter paper in the printer. Open the Print Utility dialog box. (1) Select Page Setup… in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 3 Print the pattern. (1) Select Test Print from the pull-down menu. (2) Click Print Head Alignment. 4 (3) When the confirmation message is displayed, click OK. Align the Print Head. (1) Look at the print out.
i560_QSG_US.book Page 45 Tuesday, May 6, 2003 1:43 PM Printing Maintenance Less noticeable white stripes More noticeable white stripes (4) Click Cancel. Note Click OK to perform even more detailed adjustments. If streaks appear on the printed surface when you use the printer, follow the procedure below to adjust the printing. 1. Check that the paper that you normally use is set in the printer, and then click OK. 2. Select the best patterns from Columns L and M, enter their numbers, then click Send.
i560_QSG_US.book Page 46 Tuesday, May 6, 2003 1:43 PM Troubleshooting Troubleshooting Troubleshooting usually falls into one of the following categories. In this chapter you will find the most common printing problems. Refer to the User's Guide for additional information on topics not covered in this section.
i560_QSG_US.book Page 47 Tuesday, May 6, 2003 1:43 PM Troubleshooting Cannot Install the Printer Driver Problem Possible Cause Cannot Install the Installation Printer Driver procedure not followed correctly Try This Follow the Easy Setup Instructions for proper printer driver installation. If the installer was forced to terminate due to an error, remove the CD-ROM from the CD-ROM drive and restart your computer. Reinstall the printer driver. If this problem persists, contact the Customer Care Cener.
i560_QSG_US.book Page 48 Tuesday, May 6, 2003 1:43 PM Troubleshooting Print Quality is Poor or Contains Errors Problem Possible Cause Ink does not eject Ink tank is not seated properly/Printing is properly/An ink tank Blurred/ Colors are is empty Wrong / White Streaks appear Try This Check that the ink tanks are firmly seated in the print head and reseat them if necessary. Check that the correct ink tanks are installed and that they are in the correct order. See "Replacing an Ink Tank" on page 29.
i560_QSG_US.book Page 49 Tuesday, May 6, 2003 1:43 PM Troubleshooting Problem Possible Cause Printed Paper Curls or Ink Blots Paper being used is too thin Color Intensity setting is too high Try This Use High Resolution Paper or Photo Paper Pro to print images that require a lot of ink (i.e. pictures with intense colors or photographs). Reduce the Intensity setting in the printer driver and try printing again. 1. Open the Printer Properties dialog box. 2.
i560_QSG_US.book Page 50 Tuesday, May 6, 2003 1:43 PM Troubleshooting Troubleshooting Printer Hardware Problem Printer Does Not Start or Printer Stops During Print Jobs Possible Cause Try This Print head has overheated due to long periods of continuous printing Stop printing and turn the printer off for at least 15 minutes to allow the print head to cool down. The print head tends to overheat when printing continuously for long periods of time.
i560_QSG_US.book Page 51 Tuesday, May 6, 2003 1:43 PM Troubleshooting Paper Does Not Feed Properly Problem Paper Does Not Feed Properly Possible Cause Try This Inappropriate paper Check to see if the paper you are printing on is too thick or curled. type used See "Print Media to Avoid" on page 3. Foreign objects inside the auto sheet feeder Look to see if a foreign object, such as a paper clip or pencil, has fallen into the auto sheet feeder.
i560_QSG_US.book Page 52 Tuesday, May 6, 2003 1:43 PM Troubleshooting Handling Error Messages When a printer error occurs, the POWER lamp flashes. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Number of Flashes Possible Cause Try This Two flashes Printer is out of paper Reload paper and press the RESUME/CANCEL button.
i560_QSG_US.book Page 53 Tuesday, May 6, 2003 1:43 PM Troubleshooting An Error Message Appears on the Screen Problem Possible Cause Printer not ready Error Writing / Output to LPT1 or USBxxx (USB PRNnn) Try This The POWER lamp will flash green when the printer is warming up or when a print job is being sent to the printer. It will glow a steady (non-flashing) green when it is ready for use or when the print job is completed. Paper is not loaded Load paper and press the RESUME/CANCEL button.
i560_QSG_US.book Page 54 Tuesday, May 6, 2003 1:43 PM Troubleshooting Problem Possible Cause Printer not ready “Error No.: X300” Try This If the POWER lamp is off, turn the printer on. If the POWER lamp is flashing green, the printer is initializing. Wait until the POWER lamp stops flashing. Printer not properly Ensure that the printer is securely connected to the computer.
i560_QSG_US.book Page 55 Tuesday, May 6, 2003 1:43 PM Troubleshooting Cannot Print Properly from the Digital Camera The following messages may be displayed on the digital camera or digital video camcorder when images are printed directly from them. Correct the error according to the procedure below. Camera Error Message Possible Cause Try This Printer in use Images are printed from the computer. Wait until printing ends.
i560_QSG_US.book Page 56 Tuesday, May 6, 2003 1:43 PM Appendix Appendix Installing the Printer Driver when using Mac OS 9.x When using other than Mac OS X (Mac OS 8.6 to 9.x), install the printer driver following the procedure below. 1 2 3 4 5 Turn on your Mac and insert the Setup Software & User’s Guide CD-ROM. Open the Mac OS 8.6-9.x folder on the CD-ROM, then double–click the Printer Driver folder. Double-click the Installer icon in the Printer Driver folder.
i560_QSG_US.book Page 57 Tuesday, May 6, 2003 1:43 PM Appendix User’s Guide Table of Contents Your printer’s User’s Guide offers detailed information on the following topics.
i560_QSG_US.book Page 58 Tuesday, May 6, 2003 1:43 PM Appendix Specifications Printer Printing resolution: 4800 X 1200 dpi. max. Print speed * Black printing *Print speed may vary with the content of the document and the processing speed of the host computer. Max Speed (Custom Settng 5): 22 ppm Standard: 13.0 ppm Color printing Max Speed (Custom Setting 5): 15 ppm Standard: 9.0 ppm Print width: 203.2 mm max. (8.0 in) (for Borderless Printing: 216.0 mm / 8.
i560_QSG_US.book Page 59 Tuesday, May 6, 2003 1:43 PM Appendix Bubble Jet Direct Print Compatible Paper Card #1 (Photo Paper Pro 4” x 6” /101.6 x 152.4 mm), Card #2 (Photo Paper Plus Glossy 4” x 6” /101.6 x 152.4 mm ), Card #3 (Photo Paper Plus Glossy 5” x 7” /127.0 x 177.
i560_QSG_US.book Page 60 Tuesday, May 6, 2003 1:43 PM Appendix Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use your printer safely. Do not attempt to use printer in any way not described in this manual. Warning You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions. Choosing a location Do not place the printer close to flammable solvents such as alcohol or thinners.
i560_QSG_US.book Page 61 Tuesday, May 6, 2003 1:43 PM Appendix Caution You may cause injury or damage the printer if you ignore any of these safety precautions. Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.
i560_QSG_US.book Page 62 Tuesday, May 6, 2003 1:43 PM Appendix Regulatory Information Color Printer Model: K10232 (i560) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
i560_QSG_US.book Page 63 Tuesday, May 6, 2003 1:43 PM Appendix CANON LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to the new or refurbished Canon-brand printer or scanner (each a “Product”) packaged with this limited warranty, when purchased and used in the United States only.
i560_QSG_US.book Page 64 Tuesday, May 6, 2003 1:43 PM Appendix Canon offers a full range of customer technical support* options: • • • • • • For interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.
i560_QSG_US.book Page 65 Tuesday, May 6, 2003 1:43 PM Index Index A I Adjusting Print Quality ................................................16 Advanced Printing .......................................................12 Aligning the Print Head ...............................................42 An Error Message Appears on the Screen .....................53 ImageBrowser ............................................................ 24 Ink Tank ...............................................................
i560_QSG_US.book Page 66 Tuesday, May 6, 2003 1:43 PM Index Print dialog box ............................................... 8, 10, 48 Print Head Alignment ...........................................42, 44 Print Head Cleaning .................................................... 38 Print Head Deep Cleaning ........................................... 40 print head holder ....................................................... 31 Print Media to Avoid .....................................................
