US_i70_QSG.
US_i70_QSG.book Page ii Monday, December 16, 2002 5:48 PM Canon i70 Color Bubble Jet Printer Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2003 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc.
US_i70_QSG.book Page 1 Monday, December 16, 2002 5:48 PM Contents Contents Basic Printing Turning on the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using Speciality Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
US_i70_QSG.book Page 2 Monday, December 16, 2002 5:48 PM Basic Printing Basic Printing Note This Quick Start Guide describes some of the features of your i70 printer and how to use them. For more information, view the i70 User's Guide on the Setup Software & User's Guide CD-ROM, CD-ROM or use the online help within your printer driver interface: While in the printer's Properties window, press the F1 key, or click ? in the upper right corner.
US_i70_QSG.book Page 3 Monday, December 16, 2002 5:48 PM Basic Printing Loading Paper Print Media to Avoid Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the printer to jam or malfunction.
US_i70_QSG.book Page 4 Monday, December 16, 2002 5:48 PM Basic Printing 2 Prepare to load paper. (1) Open the paper rest and output slot cover. (2) Move the paper thickness lever to the correct position for the media in use. Move to the right position for plain paper. Move to the left postion for envelope, and T-Shirt Transfers. 3 Load the paper. (1) Insert the paper into the sheet feeder with print side facing up. Load Limit Mark Do not load beyond this Load Limit Mark.
US_i70_QSG.book Page 5 Monday, December 16, 2002 5:48 PM Basic Printing Using Speciality Media Canon recommends that you use genuine Canon media to ensure optimal print quality.
US_i70_QSG.
US_i70_QSG.book Page 7 Monday, December 16, 2002 5:48 PM Basic Printing Printing with Windows Note 1 2 z The menu screens and dialog boxes that appear may vary, depending on the software application you are using. z The steps described in this section are for printing in Windows XP. Create a document or open a file to print. Open Printer Properties dialog box. (1) Select Print from the application software's File menu. (2) Ensure that Canon i70 is selected. (3) Click Preferences or Properties.
US_i70_QSG.book Page 8 Monday, December 16, 2002 5:48 PM Basic Printing 3 Specify the required settings. (1) Click Media Type to select the type of media loaded in the printer. (2) Click OK. OK Note 4 z From the Page Setup tab select the correct document size to be printed. z To adjust Print Quality settings, select Custom and click Set on the Main tab. You can control quality in the Set Print Quality dialog box. z For details about other printer driver functions, refer to the User’s Guide or Help.
US_i70_QSG.book Page 9 Monday, December 16, 2002 5:48 PM Basic Printing Printing with Macintosh Note 1 2 z The menu screens and dialog boxes that appear may vary, depending on the software application you are using. z The steps described in this section are for printing in Mac OS 9. Create a document or open a file to print. Select Paper Size. (1) Select the Page Setup from the application software's File menu. (2) Select the desired paper size from the Paper Size pull-down menu. (3) Click OK.
US_i70_QSG.book Page 10 Monday, December 16, 2002 5:48 PM Basic Printing Note z When you select the type of document from the Print Mode pulldown menu, the document will be printed in color and print quality suited to the characteristics of Media Type you have selected. Text: Select when printing documents consisting mainly of Text text. Graphic: Graphic Select when printing documents consisting mainly of graphs and graphics (illustrations) with strong color definition.
US_i70_QSG.book Page 11 Monday, December 16, 2002 5:48 PM Basic Printing Printing Data through Infrared Transmission If you have a computer or PDA with an infrared port for wireless data transmission, you can print data with a cordless connection with the printer. You can also print an address book, schedule, or memo received from a PDA in a fixed format through infrared transmission.
US_i70_QSG.book Page 12 Monday, December 16, 2002 5:48 PM Basic Printing Note z When using other than Windows 95, Windows 98 or later must have been pre-installed and Microsoft Infrared Communication Driver must be installed on your computer. z When using Windows 95, IrDA 1.0 (baud rate: max. 115.2 kbps) is used for data transmission. In this case, Microsoft Infrared Communications Driver Version 2.0 must be installed in your computer. Refer to your computer’s operation manual for more details.
US_i70_QSG.book Page 13 Monday, December 16, 2002 5:48 PM Basic Printing 2 Start Infrared Transmission. (1) Oppose the infrared port of the computer or PDA to that of the printer at a distance of less than 31.5 inch (80 cm). The effective angle of the infrared port of the printer is about 10° from the central axis in both vertical and horizontal directions. The allowable distance of communication with the printer depends on the computer or PDA you use.
US_i70_QSG.book Page 14 Monday, December 16, 2002 5:48 PM Advanced Printing Advanced Printing Printing Photographs from the Digital Camera Directly Connecting a Canon digital camera with Bubble Jet Direct function to the printer allows you to print recorded images directly without using a computer. Note To print directly from a digital camera or digital video camcorder, use only a Canon “Bubble Jet Direct” compatible digital cameras or digital video camcorders.
US_i70_QSG.book Page 15 Monday, December 16, 2002 5:48 PM Advanced Printing 2 Load the paper on the paper rest. (1) Load the media with the more glossy surface up. (2) Align the media on the right. (3) Slide the paper guide against the left side of the media. 3 Connect the printer and the digital camera. (1) Ensure that the digital camera is turned off. (2) Connect the digital camera and printer with the USB cable that came with the digital camera. The digital camera will automatically turn on.
US_i70_QSG.book Page 16 Monday, December 16, 2002 5:48 PM Advanced Printing Note z For the digital camera operation method and troubleshooting, refer to your digital camera manual. For print error messages, refer to "Handling Handling Error Messages While Using the Digital Camera" Camera on page 58. z By operating the digital camera, you can make the following prints: · You can make a standard print from the image displayed in the single display mode or in the index display mode.
US_i70_QSG.book Page 17 Monday, December 16, 2002 5:48 PM Advanced Printing Accessing Printer Driver The Printer Properties dialog box can be opened from either within an application, or directly from the Windows Start menu. Note z This manual refers to Windows XP operation. The operations may vary depending on your operating system. z Depending on your application program, the command and menu names may differ, and there may be more steps involved in opening the Printer Properties dialog box.
US_i70_QSG.book Page 18 Monday, December 16, 2002 5:48 PM Advanced Printing Adjusting Print Quality for Photographs Improving Printed Images Two important factors control the quality and output of your printed images: Paper and Ink Using recommended Canon paper, speciality media, and inks for printing photographs can significantly improve the quality of your printouts. See the inside back cover for a list of Canon media and inks for this printer.
US_i70_QSG.book Page 19 Monday, December 16, 2002 5:48 PM Advanced Printing To manually adjust Print Quality settings: 1 Open the Printer Properties dialog box. See"Opening Opening the Printer Properties Dialog Box from Your Application Program" Program on page 17. 2 Select Custom in Print Quality, then click Set... to open the Set Print Quality dialog box. 3 Move the slide bar to adjust the Print Quality. 4 When the process is complete, click OK. 1 Open the Print dialog box.
US_i70_QSG.book Page 20 Monday, December 16, 2002 5:48 PM Advanced Printing To automatically optimize the image: Photo Optimizer PRO automatically adjusts the photographic image created with a digital camera. Use this feature to compensate for unsatisfactory color balance and over- or under-exposure before printing. 1 2 3 4 1 2 3 4 5 20 Open the Printer Properties dialog box. See"Opening Opening the Printer Properties Dialog Box from Your Application Program" Program on page 17. Click the Effects tab.
US_i70_QSG.book Page 21 Monday, December 16, 2002 5:48 PM Advanced Printing To use Vivid Photo option: Vivid Photo intensifies background colors like fields, trees, oceans and skies, while maintaining natural skin tones in the images. Note In Windows Me or Windows 98 The Vivid Photo function is not available, if Background Printing has been disabled. To use Vivid Photo, select the Vivid Photo check box on the Effects tab.
US_i70_QSG.book Page 22 Monday, December 16, 2002 5:48 PM Advanced Printing To reduce noise from images recorded with digital camera: Photo Noise Reduction function reduces noise from blue portions, such as the sky and dark portions of the images recorded with your digital camera. Note In Windows Me or Windows 98 The Photo Noise Reduction function is not available, if Background Printing has been disabled. To use Photo Noise Reduction, select the Photo Noise Reduction check box on the Effects tab.
US_i70_QSG.book Page 23 Monday, December 16, 2002 5:48 PM Advanced Printing Saving and Recalling Driver Settings When you change printer driver settings for a specific print job, such as printing black and white photos, or printing documents with a special background, you can save and name these settings for future use on similar print jobs. 1 Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box from Your Application Program" Program on page 17.
US_i70_QSG.book Page 24 Monday, December 16, 2002 5:48 PM Advanced Printing 1 Open the Print dialog box. See "Printing Printing with Macintosh" Macintosh on page 9. 2 Click Apply. The Register Settings dialog box opens. 3 Enter the print settings to register. (1) Click Apply…. The dialog box to enter the new settings name opens. (2) Enter a name under which to register your settings. 4 5 Click OK. Click Close in the Register Settings dialog box.
US_i70_QSG.book Page 25 Monday, December 16, 2002 5:48 PM Advanced Printing Using Printer Driver Options Getting to know the basic features of your printer driver will provide you with sufficient expertise to print a wide range of images and documents. The illustrations below provide a basic introduction to the many features offered by your printer driver. Note For detailed description of the printer driver functions, refer to the User’s Guide.
US_i70_QSG.book Page 26 Monday, December 16, 2002 5:48 PM Advanced Printing Using the Bundle Software The Setup Software & User’s Guide CD-ROM includes photo applications designed to edit the photographs taken by digital camera and print them as photo-lab quality prints. Please use the application(s) suitable for your print purposes. Note z To install applications, refer to Easy Setup Instructions.
US_i70_QSG.book Page 27 Monday, December 16, 2002 5:48 PM Advanced Printing Printing Photographs with Windows This chapter describes the steps used to print from photo applications included with your Setup Software and User’s Guide CD-ROM using the Borderless Printing mode.
US_i70_QSG.book Page 28 Monday, December 16, 2002 5:48 PM Advanced Printing (2) Click the [+] button on the thumbnail of the photograph you want to print and specify the number of copies. Increases the number of copies. Displays the specified number of copies. Decreases the number of copies. 3 Select the paper. (1) Click the 2.Paper Selection tab. (2) Select the size of the paper you use from Paper Size. Size (3) Select the type of the paper you use from Media Type. Type 4 Select the layout.
US_i70_QSG.book Page 29 Monday, December 16, 2002 5:48 PM Advanced Printing Printing Photographs with Macintosh This chapter describes the steps used to print from photo applications included with your Setup Software and User’s Guide CD-ROM using the Borderless Printing mode.
US_i70_QSG.book Page 30 Monday, December 16, 2002 5:48 PM Advanced Printing 3 Enter layout options. (1) Select Tiled photo printing. printing (2) Click Next. Next (3) Click Page setup… setup…. 4 Select Borderless Printing. (1) Select Borderless Printing Printing. (2) Select a paper size from the Paper Size pull-down menu. The menu only displays paper sizes compatible with Borderless Printing. (3) Click OK. OK A message box pops up. Read the message and click OK.
US_i70_QSG.book Page 31 Monday, December 16, 2002 5:48 PM Advanced Printing 5 Specify the number of photographs to print on one page. (1) Select 1(1×1) from the No. of images pull-down menu. (2) Click OK. OK 6 Print the photograph. (1) Click PRINT. PRINT The Print dialog box is displayed. (2) Select a type of media for printing from the Media Type pull-down menu. (3) Select Photo from the Print Mode pull-down menu. (4) Load the selected paper in the printer. (5) Click Print.
US_i70_QSG.book Page 32 Monday, December 16, 2002 5:48 PM Printing Maintenance Printing Maintenance When Printing Becomes Faint or Colors are Incorrect When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the print head nozzles are probably clogged. Follow the procedures below to clean the nozzles.
US_i70_QSG.book Page 33 Monday, December 16, 2002 5:48 PM Printing Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles, and to verify print head alignment. Use this function when printed results are blurred or the color is incorrect. Note 1 2 Nozzle check pattern printing can be executed also from the printer itself. With the printer on, load a sheet of A4 or Letter paper in the printer.
US_i70_QSG.book Page 34 Monday, December 16, 2002 5:48 PM Printing Maintenance 1 2 With the printer on, load a sheet of paper in the printer. Open the Printer Utility dialog box. (1) Select Page Setup... in the File menu. 3 (2) Click Utilities to open the Printer Utility dialog box. Print the Nozzle Check Pattern. (1) Select Test Print from the pull-down menu. (2) Click Nozzle Check. Check (3) When the confirmation message is displayed, click OK.
US_i70_QSG.book Page 35 Monday, December 16, 2002 5:48 PM Printing Maintenance Print Head Cleaning Clean the print head if you suspect that the nozzles might be clogged. Cleaning the print head consumes ink, so perform print head cleaning only when necessary. 1 2 Ensure the printer is on. Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box Directly from the Start Menu" Menu on page 17. 3 Start Print Head Cleaning. (1) Click the Maintenance tab.
US_i70_QSG.book Page 36 Monday, December 16, 2002 5:48 PM Printing Maintenance 1 2 Ensure the printer is on. Open the Printer Utility dialog box. (1) Select Page Setup Setup... in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 3 Start Print Head Cleaning. (1) Select Cleaning from the pulldown menu. (2) Click Cleaning. Cleaning (3) Select the ink tank for cleaning. (4) When the confirmation message is displayed, click OK.
US_i70_QSG.book Page 37 Monday, December 16, 2002 5:48 PM Printing Maintenance Print Head Deep Cleaning If print quality does not improve by standard print head cleaning, try print head deep cleaning, which is a more powerful process. Print head deep cleaning consumes ink, so perform this procedure only when necessary. 1 2 Ensure the printer is on. Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box Directly from the Start Menu" Menu on page 17.
US_i70_QSG.book Page 38 Monday, December 16, 2002 5:48 PM Printing Maintenance 1 2 Ensure the printer is on. Open the Printer Utility dialog box. (1) Select Page Setup… in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 3 Start Print Head Deep Cleaning. (1) Select Cleaning from the pulldown menu. (2) Click Deep Cleaning. Cleaning (3) Select the ink tank for deep cleaning. (4) When the confirmation message is displayed, click OK.
US_i70_QSG.book Page 39 Monday, December 16, 2002 5:48 PM Printing Maintenance Aligning the Print Head Aligning the print head position allows you to print without shifts in the color registration. 1 With the printer on, load a sheet of paper in the printer. Move the paper thickness lever to the right position. 2 Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box Directly from the Start Menu" Menu on page 17. 3 Print the pattern.
US_i70_QSG.book Page 40 Monday, December 16, 2002 5:48 PM Printing Maintenance 4 Align the Print Head. (1) Look at the print out. From the patterns, select the most even, least irregular patterns and enter the number that corresponds. (2) Enter the numbers. (3) Click OK. OK Note If it is difficult to pick up the best pattern on Column F, pick the setting that produces the least noticeable vertical white stripes.
US_i70_QSG.book Page 41 Monday, December 16, 2002 5:48 PM Printing Maintenance 3 Print the pattern. (1) Select Test Print from the pull-down menu. (2) Click Print Head Alignment. Alignment 4 Align the Print Head. (1) Look at the print out. From the patterns, select the most even, least irregular patterns and enter the number that corresponds. (2) Enter the numbers. (3) Click Send.
US_i70_QSG.book Page 42 Monday, December 16, 2002 5:48 PM Printing Maintenance Replacing an Ink Tank When replacing an ink tank, check the model number very carefully. The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position. • Black: BCI-15 Black • Color: BCI-15 Color Replacing an Ink Tank When an ink tank runs out of ink, replace it using the following steps. 1 Ensure that the printer is on, and then open the print head cover.
US_i70_QSG.book Page 43 Monday, December 16, 2002 5:48 PM Printing Maintenance 3 Prepare a replacement ink tank. (1) Unpack a new ink tank and remove the orange protective cap. Important z Do not re-attach the protective cap once you have removed it. z Once the protective cap is removed, do not touch the open ink port. 4 Insert the ink tank. (1) Insert a new ink tank with it slightly slanted. (2) Push down on the 5 on the ink tank until it clicks into place. Close the print head cover.
US_i70_QSG.book Page 44 Monday, December 16, 2002 5:48 PM Printing Maintenance Resetting the Ink Counter When an ink tank is replaced, the ink counter must be reset. The low ink warning is only displayed properly if the ink counter is reset. Message Prompting Confirmation of Ink Tank Replacement When printing is started after replacement of a black or color ink tank, a confirmation message is displayed to ask whether the ink tank has been replaced.
US_i70_QSG.book Page 45 Monday, December 16, 2002 5:48 PM Printing Maintenance Important Mistakenly clicking No or Cancel, Cancel instead, will prevent the Ink Low alert from functioning properly. If this happens, manually reset the ink counter according to the following procedure. Resetting the Ink Counter in Printer Properties dialog box: z When using Windows: 1. Open the Printer Properties dialog box and click the Maintenance Tab. 2. Click Ink Counter Reset. Reset 3.
US_i70_QSG.book Page 46 Monday, December 16, 2002 5:48 PM Printing Maintenance How Low Ink Warning Setting Works The low ink warning notifies you of low ink levels during printing. The Low Ink Warning has been preset to be automatically displayed. When you reset the ink counter, it will assume the ink tank is full regardless of how much ink actually remains. The reset is the only way to match the counter value with an actual ink volume. Reset the ink counter when installing a new ink tank.
US_i70_QSG.book Page 47 Monday, December 16, 2002 5:48 PM Troubleshooting Troubleshooting Troubleshooting usually falls into one of the following categories. In this chapter you will find the most common printing problems. Refer to the User's Guide for additional information on topics not covered in this section.
US_i70_QSG.book Page 48 Monday, December 16, 2002 5:48 PM Troubleshooting Cannot Install the Printer Driver Problem Possible Cause Cannot Install the Installation Printer Driver procedure not followed correctly Try This Follow the Easy Setup Instructions for proper printer driver installation. If the installer was forced to terminate due to an error, remove the CD-ROM from the CD-ROM drive and restart your computer. Reinstall the printer driver.
US_i70_QSG.book Page 49 Monday, December 16, 2002 5:48 PM Troubleshooting Print Quality is Poor or Contains Errors Problem Possible Cause Try This Ink does not eject properly/Printing is Blurred/ Colors are Wrong / White Streaks appears / Printed Ruled Lines are Displaced Ink tank is not seated properly Print head nozzles clogged Check that the ink tanks are firmly seated in the print head and reseat them if necessary. Print the nozzle check pattern to check for uneven ink output.
US_i70_QSG.book Page 50 Monday, December 16, 2002 5:48 PM Troubleshooting Troubleshooting Printer Hardware Problem Possible Cause Try This Printer Does Not Start or Printer Stops During Print Jobs Print head has overheated due to long periods of continuous printing Stop printing and turn the printer off for at least 15 minutes to allow the print head to cool down. The print head tends to overheat when printing continuously for long periods of time.
US_i70_QSG.book Page 51 Monday, December 16, 2002 5:48 PM Troubleshooting Cannot Print to End of Job Incorrect page size selected Verify that the page size setting matches the size of the paper loaded in the printer: - Check the Paper Size setting from within your application to ensure that it matches the size of the paper loaded.
US_i70_QSG.book Page 52 Monday, December 16, 2002 5:48 PM Troubleshooting Handling Error Messages When a printer error occurs, the POWER/ERROR lamp flashes. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Number of Flashes Possible Cause Try This Two flashes Printer is out of paper Reload paper and press the RESUME/CANCEL button.
US_i70_QSG.book Page 53 Monday, December 16, 2002 5:48 PM Troubleshooting An Error Message Appears on the Screen Problem Possible Cause Printer not ready Error Writing / Output to USBxxx Try This The POWER lamp will flash green when the printer is warming up or when a print job is being sent to the printer. It will glow a steady (non-flashing) green when it is ready for use or when the print job is completed. Paper is not loaded Load paper and press the RESUME/CANCEL button.
US_i70_QSG.book Page 54 Monday, December 16, 2002 5:48 PM Troubleshooting Problem Possible Cause Try This Printer driver is not installed properly Uninstall then reinstall the printer driver. 1. Click Start, i70, and Uninstall. Start and select All Programs (or Programs), Programs Canon i70 Uninstall 2. Follow the on-screen instructions to uninstall driver. 3. Follow the procedures described in the Easy Setup Instructions and reinstall the printer driver. “Error No.
US_i70_QSG.book Page 55 Monday, December 16, 2002 5:48 PM Troubleshooting Problem Possible Cause Low Ink Warning Failure to reset ink Accompanied by Ink counter when Tank Icon With '?' installing new ink tank Try This The ink tank level accompanied by the ink tank icon with the “?” indicates ink tank is not synchronized with its ink counter. Always be sure to reset the ink counter in your printer driver when you replace ink tank. See "Resetting Resetting the Ink Counter" Counter on page 44.
US_i70_QSG.book Page 56 Monday, December 16, 2002 5:48 PM Troubleshooting Cannot Print Properly through Infrared Transmission Problem Cannot Print Properly through Infrared Transmission Possible Cause Try This The required driver is not installed • When using other than Windows 95, Windows 98 or later must have been preinstalled and Microsoft Infrared Communication Driver must be installed in the computer. • When Windows 95 is used, Microsoft Infrared Communication Driver Version 2.
US_i70_QSG.book Page 57 Monday, December 16, 2002 5:48 PM Troubleshooting Problem Cannot Print Properly through Infrared Transmission (continued) Possible Cause Try This The selected printer Check the printer port setting. port is wrong 1. Open the printer driver Properties dialog box from the Start menu. 2. Click the Details tab to ensure that the infrared port is selected as the destination port. • When using Windows XP or Windows 2000 The port [IR] is used as the infrared transmission port.
US_i70_QSG.book Page 58 Monday, December 16, 2002 5:48 PM Troubleshooting Handling Error Messages While Using the Digital Camera The following messages may be displayed on the digital camera or digital video camcorder when images are printed directly from them. Correct the error according to the procedure below. Camera Error Message Possible Cause Try This Printer in use Images are printed from the computer. Wait until printing ends.
US_i70_QSG.book Page 59 Monday, December 16, 2002 5:48 PM Troubleshooting Note z If the operation time or data transmission time is too long when the digital camera or digital video camcorder is connected to this printer, a communication time error may occur and no more images can be printed. If this error occurs, disconnect the cable, connect it again, and retry the operation.
US_i70_QSG.book Page 60 Monday, December 16, 2002 5:48 PM Appendix Appendix Installing the Printer Driver when using Mac OS 9.x When using other than Mac OS X (Mac OS 8.6 or later), install the printer driver following the procedure below. Screen shots may differ depending on the operating system used. 1 Turn on your Mac and insert the Setup Software & User’s Guide CD-ROM. TURN THE PRINTER ON. 2 3 4 Open the Printer Driver folder on the CD-ROM, then double–click the Installer icon.
US_i70_QSG.book Page 61 Monday, December 16, 2002 5:48 PM Appendix User’s Guide Table of Contents Your printer’s User’s Guide offers detailed information on the following topics.
US_i70_QSG.book Page 62 Monday, December 16, 2002 5:48 PM Appendix Options The following options are available for this printer. Confirm the product names when you purchase the options. Canon Portable Kit LK-51 This option is a battery kit that consists of a battery charger and a lithium-ion battery. Use this kit together with the printer in locations where there is no power supply (during business trip, etc.).
US_i70_QSG.book Page 63 Monday, December 16, 2002 5:48 PM Appendix Specifications Printer Printing resolution: 4800 X 1200 dpi. max. (Ink droplets can be placed in a pitch of 1/4800 inch at minimum.) Print speed * *Print speed may vary with the content of the document and the processing speed of the host computer. Black printing Draft: 13 ppm Standard: 11 ppm Color printing Draft: 9 ppm Standard: 4.9 ppm Print width: 203.2 mm max. (8.0 in) (for Borderless Printing: 216 mm / 8.
US_i70_QSG.book Page 64 Monday, December 16, 2002 5:48 PM Appendix Camera Direct Print Interface Camera Port (Connect a Canon “Bubble Jet Direct” compatible digital camera or digital video camcoder using the USB cable supplied with it.
US_i70_QSG.book Page 65 Monday, December 16, 2002 5:48 PM Appendix Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use your printer safely. Do not attempt to use printer in any way not described in this manual. Warning This product emits low level magnetic flux. If you use a cardiac pace maker and feel abnormalities, please be away from this product and consult your doctor.
US_i70_QSG.book Page 66 Monday, December 16, 2002 5:48 PM Appendix Working around the printer Caution Do not use flammable sprays near the printer. This could cause a fire or electric shock if the spray comes into contact with electrical components inside the printer. You may cause injury or damage the printer if you ignore any of these safety precautions. Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration.
US_i70_QSG.book Page 67 Monday, December 16, 2002 5:48 PM Appendix Regulatory Information Color Printer Model: K10222 (i70) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
US_i70_QSG.book Page 68 Monday, December 16, 2002 5:48 PM Appendix CANON LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to the new or refurbished Canon-brand product (“Product”) packaged with this limited warranty, when purchased and used in the United States only.
US_i70_QSG.book Page 69 Monday, December 16, 2002 5:48 PM Appendix Canon offers a full range of customer technical support* options: • • • • • For interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.com www.canontechsupport.com) www.canontechsupport.
