i860 Quick Start Guide

Printing Maintenance
46
The following message appears when ink is empty. Printing will resume as soon as ink tank
is replaced and the front cover is closed.
Note
Should missing characters or white streaks appear despite
sufficient ink levels, refer to the section "When Printing Becomes
When Printing Becomes When Printing Becomes
When Printing Becomes
Faint or Colors are Incorrect
Faint or Colors are IncorrectFaint or Colors are Incorrect
Faint or Colors are Incorrect" on page 50.
Note
When Low Ink is Detected
The BJ Status Monitor appears as soon as a print job starts. [!]
indicates a low ink level. Obtain a replacement tank as soon as
possible.
The ink tank with [X] symbol is out of ink.
Replace with a new ink tank.
• Press the RESUME/CANCEL
RESUME/CANCELRESUME/CANCEL
RESUME/CANCEL button to resume
printing with an empty ink tank. When printing is
finished, replace the ink tank immediately. If you
continue printing with an empty ink tank, it may
cause problems.
• Menu screens will vary to some degree, depending
on your software environment.
Empty ink tank
Tank with low ink level
• Click Cancel Printing
Cancel PrintingCancel Printing
Cancel Printing to
cancel the current print job.