i860 Quick Start Guide

Printing Maintenance
52
1
With the printer on, load a sheet of Letter-sized paper in the printer.
2
Open the Printer Utility
Printer UtilityPrinter Utility
Printer Utility dialog box.
(1) Double-click the hard disk icon where the printer driver was installed, the
Applications
ApplicationsApplications
Applications folder, and then the Utilities
UtilitiesUtilities
Utilities folder.
(2) Double-click the Print Center
Print CenterPrint Center
Print Center icon.
(3) Select i860
i860i860
i860 from the Name
NameName
Name list and click Configure
ConfigureConfigure
Configure.
(4) Select i860
i860i860
i860 from the Product
ProductProduct
Product list and click Select
SelectSelect
Select.
3
Print the Nozzle Check Pattern.
(3) Check the message, then click OK
OKOK
OK.
(4) Confirm the nozzle check pattern.
 Examining the Nozzle Check Pattern
The nozzle check pattern should appear as follows when ink is discharged properly.
Examine the nozzle check pattern output by the printer.
Note
If the ink tank runs out of ink, the nozzle pattern will be
incorrect. And you will need to replace the tank.
(1) Select Test Print
Test PrintTest Print
Test Print from the
pull-down menu.
(2) Click Nozzle Check
Nozzle CheckNozzle Check
Nozzle Check.