i9100 Quick Start Guide

Printing Maintenance

3 Start Print Head Cleaning.

(3) When the message is displayed, click OK

OKOK

OK.

Important Do not perform any other operations until print head cleaning

finishes. The cleaning process takes about 50 seconds.

Note

z Print head cleaning can be performed also from the printer itself.

Ensure the printer is on. Hold down the RESUME/CANCEL

RESUME/CANCELRESUME/CANCEL

RESUME/CANCEL button until

the POWER

POWERPOWER

POWER lamp flashes once, then release.

z After print head cleaning finishes, print the nozzle check pattern to

verify that the print head nozzles are clean.

See "Printing the Nozzle Check Pattern

Printing the Nozzle Check PatternPrinting the Nozzle Check Pattern

Printing the Nozzle Check Pattern" on page 37.

If the problem persists, perform print head deep cleaning.

See "Print Head Deep Cleaning

Print Head Deep CleaningPrint Head Deep Cleaning

Print Head Deep Cleaning" on page 42.

(1) Select Cleaning

CleaningCleaning

Cleaning from

the pull-down menu.

(2) Click Cleaning

CleaningCleaning

Cleaning.