i9100 Quick Start Guide

Printing Maintenance
43
1 Ensure the printer is on.
2 Open the Printer Utility dialog box.
(1) Select Page Setup…
Page Setup…Page Setup…
Page Setup… in the File
FileFile
File menu.
(2) Click Utilities...
Utilities...Utilities...
Utilities... to open the Printer Utility
Printer UtilityPrinter Utility
Printer Utility dialog box.
3 Start Print Head Deep Cleaning.
(3) When the message is displayed, click OK
OKOK
OK.
Important The process takes one or two minutes to complete, so simply wait until
the POWER
POWERPOWER
POWER lamp stops flashing.
Note
After print head deep cleaning finishes, print the nozzle check pattern to
verify that the print head nozzles are clean.
See "Printing the Nozzle Check Pattern
Printing the Nozzle Check PatternPrinting the Nozzle Check Pattern
Printing the Nozzle Check Pattern" on page 37.
If the print head is still not clean, repeat print head deep cleaning and
the nozzle check pattern printing up to three times. If the problem
persists, the print head may be worn out. Contact the Customer Care
Center.
(1) Select Cleaning
Cleaning Cleaning
Cleaning from the pull-down
menu.
(2) Click Deep Cleaning
Deep CleaningDeep Cleaning
Deep Cleaning.