i950 Quick Start Guide

Troubleshooting
56
An Error Message Appears on the Screen
Problem Possible Cause Try This
Error Writing /
Output to USBnnn
(or USBPRNnn)
Printer not ready The power lamp flashes green when the printer is warming up, or when a print
job is being sent to the printer. It glows a steady (non-flashing) green when it is
ready for use or when the print job is completed.
Paper is not loaded Load paper and press the RESUME/CANCEL
RESUME/CANCELRESUME/CANCEL
RESUME/CANCEL button.
Faulty connection Ensure the printer cable is securely connected to the computer.
Printer driver is not
installed properly
Uninstall then reinstall the printer driver.
1. Click Start
StartStart
Start, select All Programs
All Programs All Programs
All Programs (or Programs
ProgramsPrograms
Programs), Canon
Canon Canon
Canon i950
i950i950
i950, and Uninstall
UninstallUninstall
Uninstall.
2. Follow the on-screen instructions to uninstall the driver.
Follow the procedures described in the
Easy Setup Instructions and reinstall
the printer driver.
“Error No.: X202”
Not enough
memory
Increase available memory by closing any other applications currently running.
“Error No.: X203”
Printer driver fault The printer driver may not be installed correctly. Uninstall, then reinstall the
printer driver.
Refer to the
User’s Guide for instructions on how to uninstall the printer driver.
“Error No.: X300”
Printer not ready If the POWER lamp is off, turn the printer on.
If the POWER lamp is flashing green, the printer is initializing. Wait until the
POWER lamp stops flashing.
Printer not properly
connected
Ensure the printer is securely connected to the computer.
Printer not selected
in chooser
1. From the Apple
AppleApple
Apple menu, select Chooser
ChooserChooser
Chooser.
2. Click the i950
i950i950
i950 icon and ensure i950 is selected as the target connection.
If not, select it.
Note If you are using a switching hub or other device, disconnect the
printer and reconnect it directly to the computer and try
printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Note If you are using a switching hub or other device, disconnect
the printer and reconnect it directly to the computer and try
to print again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Note If the problem persists, delete all unnecessary documents
from the Extensions and the Control Panels folder.