Service manual

1 - 14
Part name Where to apply grease / oil Grease / oil name
Grease / oil
amount
Carriage slide plate
(QC1-4517)
1 Carriage unit sliding portion FLOIL KG107A 26 to 40 mg
Carriage shaft
(QC1 -4516)
2 Carriage unit sliding portion EU1 70 to 160mg
Grease pad (QA4-0721) x 2 3 Carriage unit sliding portion EU1 90 to 110mg
Shaft clip L (QC1-4654)
Shaft clip R (QC1-4633)
4
5
Carriage shaft sliding portion FLOIL KG107A
Half drop
each
Adjust plate L 6 Carriage shaft sliding portion MOLYKOTE PG641 1 drop
Adjust plate L, Chassis 7
Carriage shaft sliding portion
Carriage shaft cam sliding portion
MOLYKOTE PG641 1 drop
Adjust plate R, Chassis
8
Carriage shaft sliding portion
Carriage shaft cam sliding portion
MOLYKOTE PG641 1 drop
Lift base bushing
(QC1-2301)
9 Lift base bushing inner surface MOLYKOTE PG641 1 drop
Lift input gear (QC1-4527)
10 Lift base bushing sliding portion MOLYKOTE PG641 1 drop
Lift gear L (QC1-4560)
11 Eject tray shaft sliding portion MOLYKOTE PG641 1 drop
Operation lever
12 Eject tray shaft sliding portion MOLYKOTE PG641 1 drop
Lift gear R (QC1-4559)
13 Eject tray shaft sliding portion MOLYKOTE PG641 1 drop
Gear box R
14
Lift idler bushing, Eject tray shaft sliding
portion
MOLYKOTE PG641
1 drop
x 3 locations
Gear box L
15
Lift idler bushing, Eject tray shaft sliding
portion
MOLYKOTE PG641 1 drop
Paper guide flapper ass’y
16 Siding portion between Carriage slider FLOIL KG107A 2 drops
Note: 1 drop = 9 to 18 mg
(4) Waste ink counter setting
Waste ink amount
*1
Replacement of Bottom case/Output tray unit (Bottom case unit) or Ink absorber
Less than 7 % Not necessary
More than 7 % Necessary
*1: For waste ink amount, refer to the service test print or EEPROM information print.
See Section 3.4. Adjustment / Settings, (6) Service Mode
(5) User mode
Function Procedures Remarks
16