Service manual

2 - 2
2. How to set the paper output tray when performing paper printing
By lifting the front of the paper output tray up slowly, the paper output tray returns to the paper printing
position from the CD-R printing position.
<Expected problems and how to handle them>
Problem Handling
If the paper output tray is in the CD-R printing
position, when the access cover is opened with the
printer powered on, the carriage does not move to
the center. (Warning indication)
Change the paper output tray to the paper printing
position from the CD-R printing position (See above
2.), close the access cover, and open it again.
If the paper output tray is in the CD-R printing
position when trying to print to paper, the Power
lamp blinks in orange 6 times. (Error indication)
Press the Resume/Cancel button, change the paper
output tray to the paper printing position from the
CD-R printing position (See above 2.), and perform
printing.