User Guide

Preparation for Protocol Settings

2-11

Using a TCP/IP Network (Windows/UNIX)

Press [F3] (▼) or [F4] (▲) to highlight <09 VIEW IP ADDRESS>

➞ press [OK].

The VIEW IP ADDRESS menu appears.

Press [F2] (▼) or [F3] (▲) to display the setting you want to

check.

Each time you press (▼) or (▲), IP ADDRESS, SUBNET MASK,

DEFAULT GATEWAY, DNS SERVER ADD., HOST NAME, and DOMAIN NAME are

displayed in sequence.

You can return to the NETWORK SETTINGS menu by pressing (OK).

Settings Using NetSpot Device Installer

You can install NetSpot Device Installer from the Network User Software CD-ROM

provided with the machine, and use it to specify the protocol settings on the

computer you are using.

For instructions on how to install NetSpot Device Installer and how to specify the

protocol settings using NetSpot Device Installer, see "NetSpot Device Installer," on

p. 5-2.

NOTE

The online instructions on how to install and set protocol settings using NetSpot Device

Installer are found in the Readme ﬁle and Online Help, respectively, included on the

Network User Software CD-ROM provided with the machine.

F2 F3