User Guide

Protocol Settings
2-20
Using a TCP/IP Network (Windows/UNIX)
2
3 Enter "root" as the user name.
● If a password is set for the machine:
❑
Enter the password set for the machine.
● If no password is set:
❑ Press [Enter] on the keyboard without entering a password.
NOTE
• You can log in using a user name other than "root" (blank, etc.). However, you
cannot specify settings. You can only perform operations.
• You cannot log in as "Anonymous".
4 Execute the following command to download the config
(configuration) file.
get config
5 Edit the downloaded config file using Notepad (or similar
program).
For an explanation of each item, see "Network Setting Items," on p. 6-8.
6 Execute the following command to upload the config file.
put config CONFIG
7 To confirm the settings, execute the following command to
reset the print server.
get reset
You can also confirm that the settings are valid by restarting the machine.
The protocol settings are complete.