User Guide

NetBIOS Network Setup Procedures
4-2
Using a NetBIOS Network (Windows 95/98/Me)
4
NetBIOS Network Setup Procedures
To use a NetBIOS network, it is necessary to perform the following procedures.
IMPORTANT
• It is recommended that the network manager perform Step 1 above.
• The machine does not support NetBIOS over TCP/IP (NetBT). If you are using a TCP/IP
in your environment, use the TCP/IP protocol for printing. (See Chapter 2, "Using a TCP/
IP Network (Windows/UNIX).")
1
Network Cable Connection (See Chapter 1, "Before You Start Using This
Machine," in the PCL Printer Guide.)
Connect the network cables in accordance with the PCL Printer Guide.
2
Computer Settings for Printing (See "Setting Up a Computer for Printing," on
p. 4-3.)
Specify the settings for each computer you use for printing.