Basic Operation Guide / For information about machine setup and software installation, see the Starter Guide. This guide describes the basic use of the machine. Read this guide after finishing the machine setup. Read Important Safety Instructions ILUVW ĺS Keep this manual for future reference. For information about advanced operations and specifications, see the e-Manual included on the User Software CD-ROM.
Manuals for the Machine Starter Guide The Starter Guide describes setting up the machine and installing the software. Be sure to read this manual before using the machine. Basic Operation Guide This Manual The Basic Operation Guide describes common use and basic functions of the copy and print functions. e-Manual The e-Manual includes information about all functions and configurations of the machine. This manual is included on the User Software CD-ROM.
How to Use This Manual Symbols Used in This Manual Indicates a situation that may lead to death or injury to persons. WARNING To use the machine safely, always pay attention to these warnings. CAUTION Indicates a situation that may lead to injury to persons or damage to equipment. To use the machine safely, always pay attention to these cautions. Indicates an operation that must not be performed. Read these items carefully, and make sure not to perform the described operations.
Main Functions Scan Scanning using the Operation Panel → P.45 Remote Scanning from Computers → P.46 Select a computer to save scanned images in and scan images directly from the operation panel. Set to use the remote scan from the machine, and then scan images from a computer using the MF Toolbox. Copy 1 2 3 1 2 3 1 2 3 1 1 1 2 2 2 3 3 3 Collating Copies → P.32 Copying ID Card → P.33 Adjusting Quality → P.29 Collate copies when copying multiple documents.
Contents Basic Operation Learn the Names and Functions of Each Part of the Machine ……… Front Side …………………………………………………………… Interior ……………………………………………………………… Back Side …………………………………………………………… Learn the Functions of the Operation Panel ………………………… Switch to Copy or Scan Mode………………………………………… Enter Text …………………………………………………………… Set Date and Time …………………………………………………… Place Documents …………………………………………………… Placing Documents on the Platen Glass …………………………… Placing Documents in the Feeder (D560 Only) ……………………… Load Pape
Scan (→ p.69) You can see frequantely asked questions about the scan function.
Basic Operation This chapter describes overall information about the machine, and how to place the documents and load the paper. Read this chapter first.
Learn the Names and Functions of Each Part of the Machine Front Side D560 D530 Operation panel Use the panel to control the machine (→P.12). Feeder (D560 only) Automatically feeds documents into the machine (→P.17). Document feeder tray Place your documents in this tray. Document return tray (D560 only) Returns documents after scanning. Document guides Adjust these guides to fit the document. Feeder cover (D560 only) Open this cover to clear paper jams (→P.17).
Basic Operation Platen glass Used to scan non-standard size paper or books, as well as standard size paper (→P.17). Output tray Printed documents are output here. Paper stopper Use the paper stopper to prevent paper from falling out of the output tray. Ventilation slots Allows heat to escape from inside of the machine. Leave more than 4” (10 cm) of space around the machine. Scanning area Scans documents from the feeder. Multi-purpose tray Load paper one by one manually (→P.21).
Interior Toner cover Open this cover to access the toner cartridge or clear paper jams. Paper exit guide Open this guide to clear paper jams (→P.62). Transfer roller Transfers toner onto paper. Toner guides When inserting the toner cartridge, fit the protrusions on the toner cartridge into these guides.
D560 Basic Operation Back Side D530 Rating label The machine’s serial number (consists of three letters and a 5-digit number) and the required voltage and current are specified. Write the serial number on the back cover of this guide for reference when contacting the Canon Customer Center. USB port Connect to a computer via a USB cable. Power socket Connect the power cord. Rear cover Open this cover to clear paper jams when using the 2-sided copy function (→P.64).
Learn the Functions of the Operation Panel Reset Press to reset the settings. 0 to 9 Press to enter letters and (Numeric Keys) numbers. State Monitor/ Press to view or cancel jobs. You can also check the status of the machine (→p.34, p.42). Cancel ▲/▼ Press to scroll up and down, or to increase or decrease a value. ◄/► Press to return to the previous screen, proceed to the next screen, or move the cursor to the left or right. Back Press to return to the previous screen.
Example: Adjust the density ] Press [ (Menu). Press [ ] (Back) or [◄] to return to the previous screen. Copy Settings Change Defaults Correct Density Menu Preferences Timer Settings Copy Settings Adjustment/Maintena... Press [▲] or [▼] to highlight an item, and then press [OK]. Press [▲] or [▼] to highlight an item, and then press [OK]. If you close the menu before you press [OK], the changes made to the settings are not saved.
Enter Text Enter characters with the alphanumeric keys. To switch entry modes: Uppercase alphabetic letters and symbols Lowercase alphabetic letters and symbols <12> Numbers To enter text, symbols, and numbers: Press a key several times until the desired character is displayed. Key Entry mode: ] ( ) repeatedly. Press [ or 1. Press [▲] or [▼] to highlight , and then press [OK]. 2. Press [▲] or [▼] to highlight the desired mode, and then press [OK]. Entry mode: <12> @.
Basic Operation Set Date and Time If the incorrect date or time is printed on reports, change the date and time settings. 1 2 3 Press [ ] (Menu). Press [▲] or [▼] to highlight , and then press [OK]. Press [▲] or [▼] to highlight
Place Documents Choose the appropriate way to place documents according to the document’s type. When placing non-standard documents such as heavy paper, small paper, or booklets: Check available documents 11 3/4" (297 mm) 8 1/2" (215.9 mm) Size (Width X Length) Maximum Weight Maximum 4.4 lb (2 kg) Capacity 1 sheet Use the platen glass (→p.17).
1 2 Open the feeder or the platen glass cover. 3 Align the document with the appropriate paper size marks. • If the document does not match any of the paper size marks, align the upper left Basic Operation Placing Documents on the Platen Glass Place your document face down. edge of your document with the arrow mark. • If the document is a transparency, place white paper above the document. STMT A5 B5 A4 LTR CAUTION When closing the feeder, be careful not to get your fingers caught.
3 Neatly place the documents face up. • Do not exceed the load limit guides (A). • Make sure that the paper stack does not exceed the load limit marks (B). A B 4 Align the document guides tightly to the width of the document. IMPORTANT If the document guides are too loose or too tight, this may result in misfeeds or paper jams. IMPORTANT • While scanning documents, do not add or remove documents. • When scanning is complete, remove the document from the document return tray to avoid paper jams.
Basic Operation Load Paper Before loading paper, check the paper is the right type. If you load inappropriate paper repeatedly, this may cause paper jams. Step 1 Check if the type of paper is appropriate. Paper such as Legal, Letter, Statement, Executive, and envelopes can be used. For details about the available paper or precautions, see [Basic Operation] [Loading paper] in the e-Manual.
Loading Paper in the Paper Cassette This section describes how to load letter paper in the Paper Cassette. When loading envelopes or paper with a letterhead, see ”Loading Envelopes or Paper with a Letterhead” (→p.22). 1 Open the front cover and the lower front cover. 2 Spread the paper guides a little wider than the paper size. 3 Gently load the paper into the paper cassette with the print side face up, until the edge of the paper stack meets the back of the paper cassette.
Close the front cover and the lower front cover. Basic Operation 5 6 Specify the loaded paper size and type (→p.23). Loading Paper in the Multi-Purpose Tray 1 Open the front cover and the lower front cover. 2 Push down and lower the multi-purpose tray. 3 Spread the paper guides a little wider than the paper. 4 Gently load the paper into the multi-purpose tray with the print side face up, and adjust the paper guides tightly to the width of the paper.
Loading Envelopes or Paper with a Letterhead This section describes how to load envelopes and paper with a letterhead. Envelopes Before Loading Flatten envelopes to release any remaining air. Loosen any stiff corners of the envelopes, and flatten any curls, as shown in the figure. Loading Orientation Load the envelopes with the flaps face up. Envelope No.10, DL, ISO-C5 Paper with a Letterhead or Logo Loading Orientation Load the paper properly by following the instructions below.
Basic Operation Setting a Paper Size and Type Make sure that the Paper Settings match the size and the type of the loaded paper. 1 2 Press [ 3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK]. • To specify the paper size manually, select , and then refer to ] (Paper Settings). Press [▲] or [▼] to highlight or , and then press [OK]. “Specify a Paper Size Manually” at the bottom of this page to specify the size.
Switch to the Quiet Mode You can switch to and cancel the Quiet mode, by pressing [ ] (Quiet Mode). • By default, the Quiet mode is set to . To change this setting to , and specify the time to switch to the Quiet mode automatically, press [ ] (Menu) , and then specify a time. • The Quiet mode only reduces noise that occurs while the machine is performing jobs.
Basic Operation Use the Toner Saver Mode You can set whether or not to conserve toner when copying. When using the Toner Saver mode, the output may not be clear, as subtle details, such as thin lines and light colors, may not be clearly reproduced. 1 2 3 Press [ ] (Menu). Press [▲] or [▼] to highlight , and then press [OK]. Press [▲] or [▼] to highlight , and then press [OK]. Preferences Display Settings Toner Saver Mode Paper Feed Method Sw...
Memo 26
Copy This chapter describes basic copy functions.
Make a Basic Copy 1 Place your documents (→p.16). * D530 is not equipped with the feeder. IMPORTANT 2 3 If the document guides are too loose or too tight, this may result in misfeeds or paper jams. Switch to the Copy mode (→p.13). Enter the desired copy quantity (1 to 99) with the alphanumeric keys. ] (Clear) to delete the entered copy quantity. • Press [ Copy: Press Start 100% 1 LTR Density: + -0 Original Type: Text... 2-Sided: Off 01 4 Press [ ] (Start).
Enlarge or Reduce Copies Enlarge or reduce copies using custom copy ratios. Place your documents (→p.16). Switch to the Copy mode (→p.13). Press [▲] or [▼] to highlight , and then press [OK]. Copy 1 2 3 4 Press [▲] or [▼] to highlight the desired ratio, and then press [OK]. • If you want to set a copy ratio in 1% increments, select , and then enter the copy ratio using the numeric keys or press [▲] or [▼] to specify the ratio.
Selecting the Document Type Select the appropriate document type. 1 2 3 4 5 Place your documents (→p.16). Switch to the Copy mode (→ p.13). Press [▲] or [▼] to highlight , and then press [OK]. Press [▲] or [▼] to highlight the appropriate document type, and then press [OK]. Best suited for text-only documents. Suitable for documents that contain text and photos. (Scanned documents are at a low resolution at high speed.
Make Double-Sided Copies You can make double-sided copies from single-sided documents. When using the D560, you can also make double-sided or single-sided copies from double-sided documents. Place your documents (→p.16). Switch to the Copy mode (→p.13). Press [ is lit. Copy 1 2 3 ] (2-Sided) until the indicator of the desired 2-Sided copy format • To make double-sided copies from single-sided documents, place the documents in the feeder or on the platen glass.
Copy Multiple Pages onto One Sheet You can combine multiple pages (two or four pages) onto one copy sheet. 1 2 3 Place your documents (→p.16). Switch to the Copy mode (→p.13). Press [ ] (N on 1) until the indicator of desired format is lit. • To specify the page layout, press [OK], and then select
Copy a Double-Sided ID Card You can make a copy of a double-sided ID card onto single-sided paper. 1 Place an ID on the platen glass. • Place the card at the center of the left edge of the platen glass, with a 1/4” (5 mm) space created. Copy STMT A5 STMT A5 B5 STMT 5mm A5 A4 B5 STMT A4 LTR A5 5mm LTR 2 3 4 5 Switch to the Copy mode (→p.13). Press [ ] (N on 1) until the indicator of ID Card Copy is lit. Press [ ] (Start). Turn and place the card.
View and Cancel Copy Jobs You can view or cancel copy jobs while the jobs are in progress. 1 2 3 Press [ ] (Status Monitor/Cancel). Press [▲] or [▼] to highlight , and then press [OK]. View the details of a copy job or cancel the job. • To view the details, press [▲] or [▼]. • To cancel the job, press [▲] or [▼] to highlight , and then press [OK].
Print This chapter describes basic print functions.
Print a Document 1 Make sure that a computer and the machine are connected properly, and the MF Drivers are installed on the computer. 2 3 Open a document from an application, and then open the Print window. 4 Click [Print] to start printing. Select your printer. Canceling Print Jobs Press [ ] (Stop) twice. * It is valid when only one job is processing or waiting. Enlarge or Reduce a Document You can enlarge or reduce the data to fit the paper size automatically, or specify a custom ratio.
Select the paper size of the document. To automatically scale the document to fit the loaded paper, select an output size. To specify the print ratio manually, select [Manual Scaling], and then specify the scaling ratio. Print 4 5 Click [OK] to return to the Print window. Click [OK] to start printing. Print a Double-Sided Document You can print on both sides of paper. 1 2 3 Open a document from an application, and then open the Print window.
Print Multiple Pages onto One Sheet You can reduce and print 2, 4, 6, 8, 9, or 16 pages of an original document onto a single sheet of paper. This feature allows you to save paper or to view several pages at once. 1 2 3 Open a document from an application, and then open the Print window. Select your printer, and then open the Printing Preferences window. Click the [Page Setup] tab, and then specify the number of pages and a page layout. Select the number of pages to print on a single page.
Print a Booklet You can print pages side-by-side, and then fold them to create a booklet. 1 2 3 Open a document from an application, and then open the Print window. 4 Specify the settings for the booklet, and then click [OK]. Select your printer, and then open the Printing Preferences window. Click the [Finishing] tab, select [Booklet Printing], and then click [Booklet]. Print You can choose to print all pages at once or print only the specified pages.
Print a Poster You can enlarge a one-page document and print it on multiple pages. You can then combine the printed pages to create a large poster. 1 2 3 Open a document from an application, and then open the Print window. Select your printer, and then open the Printing Preferences window. Click [Page Setup] tab, and then select [Poster(N×N)] from the [Page Layout] drop-down menu. Select [Poster [N×N]] (N×N is split numbers of divided pages wide by high). 4 5 6 Click [OK] to return to the Print window.
Add Watermarks to a Printout You can add watermarks, such as “DRAFT,” to a document. 1 2 3 Open a document from an application, and then open the Print window. Select your printer, and then open the Printing Preferences window. Click the [Page Setup] tab, and then specify the settings for watermark printing. Print Select to add watermarks. Select the desired watermark. 4 To create a new watermark, click [Edit Watermark], and then enter the new text. Add the edited watermark.
View and Cancel Print Jobs You can view or cancel print jobs that are waiting or in progress. 42 1 2 3 Press [ 4 Press [ ] (Status Monitor/Cancel). Press [▲] or [▼] to highlight , and then press [OK]. View the details of a print job or cancel the job. • Press [▲] or [▼] to view the print job status. • Press [OK] to view the detailed information. • To cancel the job, press [▲] or [▼] to highlight , and then press [OK]. ] (Status Monitor/Cancel) to close the screen.
Scan This chapter describes the basic scan functions.
Understand the Scanning Method Various scanning methods are provided. Scan a Document with the Operation Panel (→p.45). Basic Method Connect your computer to the machine. You can use the operation panel to scan an image, and then send the image to a computer. Scan a Document with the MF Toolbox (→p.46). You can set the various scan settings with the MF Toolbox.
Scan a Document with the Operation Panel You can scan a document using the Scan mode. 1 Make sure that a computer and the machine are connected (See the Starter Guide). 2 Place your documents (→p.16). Scan * D530 is not equipped with the feeder. 3 4 Switch to the Scan mode (→p.13). Press [▲] or [▼] to highlight , and then press [OK]. Select the scan type. Computer Remote Scanner 5 Press [▲] or [▼] to specify a destination, and then press [OK]. Specify destination.
7 Press [OK] to start scanning. When placing your documents in the feeder Scanning operation starts. When placing your documents on the platen glass 1. To continuously scan the document, press [▲] or [▼] to highlight , and then press [OK]. 2. press [▲] or [▼] to highlight , and then press [OK]. • When scanning is complete, the folder that contains the scanned images is opened on the screen of the computer. Canceling Scan Jobs Press [ ] (Stop) twice.
Select the scan type. Computer Remote Scanner 4 From your computer, double-click the [Canon MF Toolbox 4.9] icon. 5 When the MF Toolbox appears, click the desired scan mode button. [Mail] • The scan preset for an e-mail attachment is displayed. • The scanned document will be attached to a new message Scan in your e-mail application. • The scan preset for the OCR (Optical Character Reader) is [OCR] [Save] displayed. • The scanned document will be read by your OCR software.
Configuring Scan Settings Using the MF Toolbox This section describes the layout and features of each setting dialog box of the MF Toolbox. For more details, see [Scanning] → [Using the MF Toolbox] in the e-Manual. • Set the location of a document to be scanned. • [Auto Mode] that detects the source automatically is recommended. Example: When [Mail] or [PDF] menu is selected in MF Toolbox Set the size of the document to be scanned. • Set the color mode.
• Select to specify the scan settings using the scanner driver (→p.50). • When [Start] is clicked with this check box selected, the [ScanGear MF] dialog box appears. • This check box is not available when you scan using the [OCR] button. Scan Set the orientation of the document. Set the PDF file type to save the scanned image. PDF (Single Page) Creates a single-page PDF file. PDF (Multiple Pages) Save all scanned images as a single PDF file.
Scan a Document with the Scanner Driver If you use the scanner driver window (ScanGear MF Window), you can use various features and scan only the necessary part with the preview function. 1 2 3 4 5 Place your documents (→p.16). 6 When the scan setting window appears, select the [Display the Scanner Driver] check box, and then click [Start]. 7 Select [Preview] on the scanner driver dialog box, and then specify settings as needed. Switch to the Scan mode (→p.13).
Maintenance and Management This chapter describes how to clean the machine, replace the toner cartridge, and explains the report and list function used for managing the machine.
Clean the Machine Clean the exterior and interior of the machine, feeder, and the fixing unit periodically. Cleaning the Exterior and Interior Clean the exterior and interior of the machine to prevent toner powder and paper dust from accumulating inside. IMPORTANT For safety, be sure to turn OFF the machine and disconnect all cables from the machine before cleaning the machine.
4 Remove any toner or paper debris from the interior of the machine, with a soft, dry cloth that is clean and lint-free. 5 6 7 Insert the toner cartridge. Close the toner cover, and then lower the scanning platform. Reconnect all the cables, and then turn ON the power. CAUTION Maintenance and Management When closing the scanning platform: Be careful not to get your fingers caught. Do not touch the fixing unit (A). Touching the fixing unit (A) may cause burns as it becomes very hot during use.
Cleaning the Platen Glass and Feeder If a scanned image has unexpected specks, clean the platen glass and feeder. Cleaning the Platen Glass 1 2 3 4 Turn OFF the machine and disconnect all the cables from the machine. 5 6 Close the feeder or the platen glass cover. Remove any documents from the platen glass. Open the feeder or the platen glass cover. Clean the platen glass with a soft, dry cloth. Reconnect all the cables, and then turn ON the power.
Check and Replace Toner Cartridges Toner cartridges are consumable products. When the toner has almost run out, streaks may appear on printed pages. Replace the toner cartridge if necessary. Gently shake the toner cartridge 5-6 times to evenly distribute the toner (→p.55). Maintenance and Management If the print result is not improved, replace the toner cartridge (→p.56).
3 Insert the toner cartridge. 4 Close the toner cover, and then lower the scanning platform. Replacing the Toner Cartridge You can purchase replacement toner cartridges from your local authorized Canon dealer. Supported genuine Canon toner cartridge: Canon Cartridge 128 Starter 1 Open the operation panel and the toner cover, and then remove the toner cartridge. 2 Prepare a new toner cartridge. • Store the protective bag.
IMPORTANT When pulling out the sealing tape: • Do not pull the sealing tape at an angle or up and down. If the tape breaks, it may not be pulled out completely. • Even if the sealing tape stops at midpoint, pull it out of the toner cartridge completely. • If any tape remains in the toner cartridge, this may result in poor print quality. • Dispose of the packing materials according to local regulations. Insert the toner cartridge. 4 Close the toner cover, and then lower the scanning platform.
• Follow all local and federal regulations when disposing of the sealing tape removed from the new toner cartridge. • Canon will collect and recycle your used toner cartridges (→p.71). • For more details about handling toner cartridges, see [Handling Toner Cartridges] in the e-Manual. Manage Using the List Function Print out lists to view information about the machine and settings. 1 2 3 4 5 Press [ ] (Report). Press [▲] or [▼] to highlight , and then press [OK].
Troubleshooting This chapter describes how to clear paper jams and offers solutions to problems you may be having.
Clear Jams When appears on the display, a paper jam has occurred in the feeder or inside the machine. To remove the jammed document or paper, follow the instructions on the display. Paper jam. Press [ ] to display steps. WARNING When removing jammed documents or paper: Use caution to avoid paper cuts.
Clearing Document Jams in the Feeder (D560 Only) After removing any documents placed in the feeder, follow the procedure below to remove jammed documents. Open the feeder cover and lift the lock release lever. 2 Remove any jammed document by pulling it gently. 3 Hold the green grip, and then open the inner cover. 4 Remove any jammed document by pulling it gently. 5 6 Close the inner cover. Troubleshooting 1 Replace the release lever and close the feeder cover.
Clearing Paper Jams Inside the Machine Follow the procedure below to remove jammed paper. Step 1 Check and remove the jammed paper inside the machine. 1 2 Lift the scanning platform, and then open the toner cover. 3 Remove any jammed paper by pulling it gently. 4 Push up the green colored part (A), and then pull the paper exit guide (B) to open. Remove the toner cartridge. (A) (B) 62 5 Remove any jammed paper by pulling it gently. 6 Lift the paper exit guide, and then firmly close it.
7 Gently pull any jammed paper downward from between the fixing unit (A) and roller (B) until the leading edge emerges from the machine. (A) (B) 8 When the leading edge emerges, hold both sides of the jammed paper and carefully pull it out. 9 Insert the toner cartridge, close the toner cover, and then lower the scanning platform. CAUTION Do not touch the fixing unit (A). Touching the fixing unit (A) may cause burns as it becomes very hot during use. (A) Do not touch the transfer roller (B).
2 Remove any paper in the multi-purpose tray. 3 Pull up the multi-purpose tray, and then remove any paper loaded in the paper cassette. 4 Remove any jammed paper by pulling it gently. 5 Reload paper into the paper cassette and close the front cover and lower front cover. Step 64 3 Check and remove the jammed paper in the rear cover. 1 Open the rear cover. 2 Remove any jammed paper by pulling it gently. 3 Close the rear cover.
Resolve a Displayed Message This section describes some of messages related to the memory and paper. For more details about other messages, see [Troubleshooting] [Onscreen Messages] in the e-Manual. Message Action • Print pages successfully scanned or cancel the job. • Split the job into smaller subsets or change the . Change the document type in order.
Improve Output Quality Follow the recommended actions for each symptom to improve the output quality. If you cannot solve the problem with the following actions, see [Troubleshooting] in the e-Manual. Symptom Example Action Paper curls. • • • • Verify that the appropriate paper is being used (→p.19). Print a test page with new paper. Verify that the paper is loaded properly (→p.19). Change the setting from the operation panel. Paper creases.
Symptom Example Action • Verify that the appropriate paper is being used (→p.19). • Print a test page with new paper. • If the machine is not in use for a long time after the toner cartridge The printed paper has vertical steaks. Smudge marks of spattering toner appear around the text or as patterns. The overall print result is dark. has been replaced, change the settings from the operation panel.
Resolve a Problem Follow the procedures below to resolve your problem. WARNING If the machine makes strange noises or emits smoke or odors: Turn OFF the power immediately, disconnect the power cord, and contact the Canon Customer Care Center. Do not attempt to disassemble or repair the machine yourself. IMPORTANT 1 Verify that the Error indicator is not on or blinking. • Make sure that paper is loaded properly (→p.19). • Remove any jammed paper (→p.60).
FAQ Q Can I use the scan function when using a machine and drivers that are shared by another person? └A Q No, you may not use the scan function when sharing drivers that are installed to another computer. To use the scan function, install the MF Drivers on your computer. You can use the supplied user software CD-ROM or download the drivers from the official Canon Web site (http://www.usa.canon.com). For details about installing drivers, see the Starter Guide.
Q Can I scan multiple images and save as a single PDF file? └A Yes, you can save multiple images as a single PDF file when scanning with the MF Toolbox. To make a single PDF file of multiple pages, 1. From the PDF mode screen of MF Toolbox, select [PDF (Multiple Pages)] in [Save as Type]. 2. Scan the documents.
Recycling Used Cartridges Canon has instituted a worldwide recycling program for cartridges called “The Clean Earth Campaign”. This program preserves precious natural resources by utilizing a variety of materials found in the used cartridges that are of no further use, to remanufacture new cartridges which, at the same time, keeps the environment cleaner by reducing landfill waste. Complete details concerning this program are enclosed in each Cartridge box. U.S.A.
Please call 1-800-OK-Canon to receive U.S. Postal Service merchandise returning label. • Give the shipment to your UPS driver when you receive your next regular delivery; (UPS may charge a fee for customers who call UPS to pick up a cartridge shipment if they do not already have a delivery scheduled.) or • Take the shipment to your local UPS receiving point. Working to preserve endangered species is a long-standing Canon interest.
Power Supply Maintenance and Inspections WARNING • Do not use power cords other than the one provided, as this can WARNING • Turn OFF the machine and unplug the power cord from the result in a fire or electrical shock. • Do not modify or bend the power cord and do not pull on it • • • • • with great force. Do not place heavy objects on the power cord. Damaging the power cord may result in a fire or an electric shock.
Legal Notices Legal Limitations on the Usage of Your Product and the Use of Images Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as scanned, printed or otherwise reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability. A non-exhaustive list of these documents is set forth below. This list is intended to be a guide only.
Memo 75
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON MARKETING JAPAN INC. 16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON EUROPA N.V. Bovenkerkerweg, 59-61, 1185 XB Amstelveen, The Netherlands CANON CHINA CO. LTD. 15F Jinbao Building No.