imageCLASS D780/D760/D761 Reference Guide
4-4
– To set a fixed paper size: Press Additional Functions, then
select:
COMMON SETTINGS,
MP TRAY PAPERSIZE,
ON
Choose the appropriate paper size from LTR, STMT, CUSTOM PAPER SIZE*, A4, B5, A5 or LGL.
* When CUSTOM PAPER SIZE is selected, specify the width and length of the paper in mm.
Available setting range in length : 5” (127 mm) to 14” (356 mm)
Available setting range in width : 3” (76 mm) to 8
1
/
2
” (216 mm)
Refer to the following conversion table for inches and millimeters.
• To specify the paper size every time you load the paper into the multi-purpose tray, set the MP TRAY
PAPERSIZE to SET ON LOADING in the Additional Functions.
In this setting, you can also select the type of the envelope loaded in the multi-purpose tray.
■ Specifying the Paper Type
PLAIN PAPER is selected as the default paper type. When making copies on other paper than plain paper, you
can specify the paper type according to the following. Specifying the paper type can prevent poor copy quality, or
the copy image not being printed correctly.
• To set the Additional Functions, see “Accessing the Additional Functions”. (→ p. 7-1)
Press Additional Functions, then
select:
COMMON SETTINGS,
MP PAPERTYPE
Then choose the paper type from the following.
– TRACING PAPER (16 - 17-lb bond or 56 - 63 g/m
2
) : Thin paper, tracing paper
– TRANSPARENCY : Transparencies
– SPECIAL PAPER 1 (21 - 32-lb bond or 81 - 128 g/m
2
) : Thick paper*
– SPECIAL PAPER 2 : Envelopes
* If the images are dirty even when making copies in the SPECIAL PAPER 1 setting, do the following.
Press Additional Functions, then
select:
COMMON SETTINGS,
HIGH COPY MODE
Then choose ON.
Inch Millimeter Inch Millimeter Inch Millimeter
3”
3
1
/4”
3
1
/2”
3
3
/4”
4”
4
1
/4”
4
1
/2”
4
3
/4”
5”
5
1
/4”
5
1
/2”
5
3
/4”
6”
6
1
/4
”
6
1
/2
”
76
83
89
95
102
108
114
121
127
133
140
146
152
159
165
6
3
/4”
7”
7
1
/4”
7
1
/2”
7
3
/4”
8”
8
1
/4”
8
1
/2”
8
3
/4”
9”
9
1
/4”
9
1
/2”
9
3
/4”
10”
10
1
/4
”
171
178
184
191
197
203
210
216
222
229
235
241
248
254
260
10
1
/2”
10
3
/4”
11”
11
1
/4”
11
1
/2”
11
3
/4”
12”
12
1
/4”
12
1
/2”
12
3
/4”
13”
13
1
/4”
13
1
/2”
13
3
/4
”
14”
267
273
279
286
292
298
305
311
318
324
330
337
343
349
356
04 RG_Chap4.qxd 03.7.10 3:33 PM Page 4-4