User Guide

Grasp the cartridge
with one hand, firmly
and slowly pull out
the sealing tape tab
with the other hand.
Remove the sealing
tape completely.
Place the cartridge on
a flat and stable
surface, grip the
sealing tape tab,
and snap in the
direction shown. Make
sure that the tab is
detached from the
cartridge.
Slide the cartridge
into the machine with
the arrow mark up as
far as it will go.
Close the cartridge
cover and slide the
platen unit back to the
original position.
Pull out the
cassette until it
stops.
Load the paper stack beneath
the cassette’s length guide
1
and width guides 2.
Make sure that the paper stack does not
exceed the length and width guides in
the cassette.Failure to do so will cause a
paper jam.
Gently insert the cassette as
far as it will go.
Load paper.
Install the cartridge.
Remove the cartridge
from its bag.
Rock the cartridge
several times to
distribute the toner
evenly.
Arrow Mark
3
5
4
6
1
2
1
2
E111MB Set-Up Sheet.qxd 6/21/04 9:11 AM Page 2