User Guide

Install the printer driver (CAPT).
For parallel connection:
<Windows 95/98/Me>
Make sure that the computer is turned off, and that the parallel cable is securely connected to the machine and the computer.
Plug the machine’s power cord into a power outlet to turn it on.
Turn the computer on and start Windows.
Plug and Play will activate and the
Found New Hardware Wizard (in Windows 95, New Hardware or Device Wizard) dialog box appears.
Click
Cancel.
Place the CD-ROM into the CD-ROM drive of your computer. The CD-ROM Menu starts automatically.
When the installation is
complete, the dialog box
shown on the left appears.
To close the dialog box,
click
OK.
Click Canon iC D800
Install
.
The
Add Printer Wizard
dialog box appears.
Select Local Printer, then
click
Next.
The Manufacturers/Printers
selection dialog box
appears.
Use Browseto select
the directory that contains
the printer driver, then
click
OK.
For example,if you are
using Windows 95/98, and
your CD-ROM drive is drive
D:, browseD:\English\Win9x,
and click
OK.
Select the port the
machine is connected to
(usually
LPT1:), then click
Next.The Printer name
dialog box appears.
If you select the port the
machine is not
connected to, the machine
will not print.
Click Next.
The Local
printer/Network printer
selection dialog box
appears.
Click Have Diskin the
Manufactures/Printers
dialog box.
The
Install From Disk
dialog box appears.
The printers selection
dialog box appears.
Click
Next.
The printer port
selection dialog box
appears.
Click Finish.
If you want to change the
printer name, type a new
name into the text box.
If you want to set this
printer as the default
printer, select
Ye s .
If no other printer driver
is installed on your
computer, this printer will
be set as the default
printer automatically.
NOTE
If the CD-ROM Menu does not start automatically, choose Run... from the Start Menu.Type D:\SETUP.EXE (if your CD-ROM drive is drive D:) in the
command line and click
OK.
1
2
3
4
5
6
7
10
11
12
13
8
9
E111MB Set-Up Sheet.qxd 6/21/04 9:11 AM Page 6