Service manual

Chapter 6
6-1
6.1 Construction
6.1.1 Outline
0007-3441
Below illustration shows the construction of the image formation system.
The machine is a cartridge type, in which the core of its image formation components are constructed as a signal
entity: photosensitive drum, primary charging roller, developing cylinder, cleaning blade, and toner housing.
The DC controller PCB has a built-in high-voltage output assembly, and generates high voltage for charging at such
times as necessary.
F-6-1
High-voltage
output block
DC controller PCB
Cartridge
Primary
charging roller
Cleaning blade
Static
eliminator
Transfer charging
roller
Developing
cylinder
Drum
J205
J207
J208
J209
Transfer guide