Service manual

Chapter 7
7-12
F-7-14
7.6.3.2 Removing the Rear
Cover 0007-1578
1) Remove the 13 screws [1], and detach the rear
cover [2].
F-7-15
7.6.3.3 Removing the Printer
Controller PCB (if equipped
with printer functions) 0007-1576
1) Disconnect the connector [1].
2) Remove the 5 screws [2], and detach the printer
controller PCB [3].
F-7-16
7.6.3.4 Removing the Image
Processor PCB 0007-1574
1) Disconnect all connectors from the image
processor PCB [1].
2) Remove the 6 screws [2], and detach the image
processor PCB [1].
F-7-17
7.6.3.5 Removing the Cassette
Pickup Solenoid 0007-7197
1) Remove the cassette.
2) Place the machine so that its pickup side is at the
bottom.
[2]
[1]
[2]
[1]
[1]
[1]
[3]
[2]
[2]
[1]
[2] [2][2]
[2]
[1]
[2]