Service manual

Chapter 7
7-17
F-7-35
7.6.7.6 Removing the ADF (if
equipped with ADF
functions) 0007-1590
1) Remove the screw [1], and detach the ADF harness
cover [2].
F-7-36
2) Remove the harness retainer [1].
3) Remove the screw [2], and disconnect the
connector [3].
F-7-37
4) Using a flat-blade screwdriver or the like, remove
the 2 covers [1]; then, using long nose pliers or the
like, remove the 2 pins [2].
F-7-38
5) Return the reader unit to its initial position.
6) Open the ADF.
7) Using a flat-blade screwdriver, remove the cover
[1].
8) Detach the ADF [2] from the host machine.
Take care so that no part will become trapped by
harness of the ADF.
[2]
[1]
[1]
[1]
[2][1]
[1]
[3]
[2]
[1]
[2]