Service manual

Chapter 7
7-20
F-7-48
7.6.7.13 Removing the
Modular Jack PCB (if
equipped with fax functions) 0007-1602
1) Disconnect the connector [1].
2) Remove the screw [2], and detach the modular jack
PCB [3].
F-7-49
7.6.7.14 Removing the Main
Motor Unit 0007-1604
1) Remove the plastic film [1].
F-7-50
2) Pick the hook [1] with long nose pliers or the like,
and detach the registration roller gear [2].
Take care not to break the claw when removing the
gear.
F-7-51
3) Remove the 6 screws [1], and detach the plate [2].
F-7-52
[2]
[1]
[2]
[3]
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[1]