Service manual

Chapter 7
7-28
F-7-84
7.6.8.15 Removing the Manual
Feed Pickup Solenoid 0006-9743
1) Remove the screw [1], and detach the manual feed
pickup solenoid [2].
F-7-85
7.6.9 Registration Roller Unit
7.6.9.1 Removing the Left
Cover 0006-9872
1) Remove the screw [1], and detach the left cover [2].
F-7-86
7.6.9.2 Removing the Rear
Cover 0006-9873
1) Remove the 13 screws [1], and detach the rear
cover [2].
F-7-87
7.6.9.3 Removing the Printer
Controller PCB (if equipped
with printer functions) 0006-9874
1) Disconnect the connector [1].
2) Remove the 5 screws [2], and detach the printer
controller PCB [3].
F-7-88
7.6.9.4 Removing the Image
Processor PCB 0006-9876
1) Disconnect all connectors from the image
processor PCB [1].
2) Remove the 6 screws [2], and detach the image
processor PCB [1].
[1][2][1]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[1]
[1]
[3]
[2]
[2]
[1]