Service manual

Chapter 8
8-1
8.1 Construction
8.1.1 Outline
0006-4120
The fixing pressure roller and the delivery roller are driven by the main motor.
The paper separated from the photosensitive drum is moved to the inside of the fixing assembly; the paper is then
moved outside it after the toner is fused to the paper by the work of the fixing film and the fixing pressure roller.
The delivery sensor (PS3) is used to detect paper coming out of the fixing assembly.
F-8-1
F-8-2
Fixing heaterFixing filmDelivery roller
Delivery sensor (PS3) Fixing pressure
roller
Fixing inlet guide
Fixing pressure roller
Main thermistor (TH1)
Sub thermistor (TH2)
Thermal fuse (FU2)
Fixing film
Fixing heater (H1)