Service manual

Chapter 8
8-8
F-8-13
MENO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
F-8-14
8.4.1.6 Removing the Reader
Unit 0006-9890
1) Disconnect the 2 connectors [1], and remove the
harness retainer [2].
F-8-15
2) Remove the 4 screws [1], and detach the 2 reader
stoppers [2].
F-8-16
3) Slide the reader unit [1] as shown, and detach the
reader unit [1] from the front side.
F-8-17
[2]
[1]
[1]
[2]
[2]
[1]
[2]
[1]
[1]