Service manual

Chapter 8
8-14
F-8-39
8.4.2.10 Removing the Fixing
Assembly 0006-9928
1) Disconnect the 3 connectors [1].
F-8-40
2) Remove the 3 screws [1], and detach the fixing
assembly [2].
MEMO:
To remove the screw [1] used to secure the fixing
assembly in place, try removing the screws from
above the upper cover using a long screwdriver (i.e.,
make use of the opening above the screws to facilitate
the work).
F-8-41
When mounting the fixing assembly, be sure to
engage the gear of the fixing assembly and the gear on
the main motor side by shifting up the lever as shown.
F-8-42
8.4.2.11 Removing the Fixing
Film Unit
0006-9925
1) Remove the fixing upper cover [1].
2) Remove the 2 screws [2].
3) Remove the 2 hooks [3], and detach the plate [4].
[1]
[1]
[1]
[1]
[2]
[1][1]