Service manual

Chapter 8
8-17
F-8-52
5) Return the reader unit to its initial position.
6) Open the ADF.
7) Using a flat-blade screwdriver, remove the cover
[1].
8) Detach the ADF [2] from the host machine.
Take care so that no part will become trapped by
harness of the ADF.
F-8-53
8.4.3.5 Removing the Control
Panel
0006-9913
1) Slide the reader unit, and open the cartridge cover.
2) Remove the screw [1], and slide the control panel
[2] to the left.
F-8-54
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel slightly as shown when
disconnecting the connector [2].
F-8-55
MENO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
[1]
[2]
[2]
[1]
[1]
[2]
[2]
[1]