Service manual

Chapter 9
9-8
T-9-6
T-9-7
T-9-8
9.2.4 Energy-Saving Function
9.2.4.1 Outline 0006-4215
The machine is equipped with an ESS mechanism to limit the consumption of power in standby as much as possible.
The ESS function is controlled by the image processor PCB, and the machine shifts to ESS mode when the Energy
Saver key in the control panel is pressed or the machine remains in standby state for a specific period of time.
The standby period after which the ESS mode is started is set in user mode: 3 to 30 min (factory default: 5 min).
9.2.4.2 Operation 0006-4216
While the machine remains in ESS mode, all in the control panel except the LED indicator of the Energy Saver key
a. User Data
Item List
register mode user data list
dial register mode 1-touch spd dial list
1-touch spd dail list (detail)
coded speed dial list
coded speed dial list (detail)
group dial list
b. Service Mode Data
Item Item
service mode data system data list
c. Control Data
Item List
communication control record activity report
system dump record system dump list