Service manual

Chapter 9

9-12

9.3.3 Removing the DC Controller

PCB

9.3.3.1 Removing the Left

Cover 0006-9575

1) Remove the screw [1], and detach the left cover [2].

F-9-14

9.3.3.2 Removing the Rear

Cover 0006-9568

1) Remove the 13 screws [1], and detach the rear

cover [2].

F-9-15

9.3.3.3 Removing the Delivery

Cover 0006-9570

1) Remove the 3 screws [1], and detach the delivery

cover [2].

F-9-16

9.3.3.4 Removing the DC

Controller PCB 0007-7200

1) Disconnect the 4 connectors [1] used to connect the

image processor PCB and the power supply unit.

2) Disconnect the connector [2] used to connect the

NCU PCB and the power supply unit.

3) Disconnect the connector [3], and free the harness

[4] from the harness guide [5].

F-9-17

4) Disconnect the 3 connectors [1].

[2]

[1]

[2]

[1]

[2]

[1]

[2]

[4][4] [5][3]