Service manual

Chapter 9
9-13
F-9-18
5) Remove the cassette.
6) Place the machine so that its pickup side is at the
bottom.
F-9-19
7) Remove the 8 screws [1], and detach the bottom
plate [2].
F-9-20
8) Remove the 2 screws [1], and detach the cassette
rear cover [2].
F-9-21
9) Free the harness [1] from the harness guide [2].
10) Remove the 7 screws [3], and detach the power
supply unit [4].
F-9-22
11) Disconnect the 3 connectors [1].
12) Remove the 4 screws [2], and detach the DC
controller PCB [3].
[1]
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[1]
[4]
[3] [2]
[2]
[1]
[2]
[1]
[2]
[3]
[3]
[3]