Service manual

Chapter 9
9-16
F-9-31
9.3.6.2 Removing the Rear
Cover 0006-9592
1) Remove the 13 screws [1], and detach the rear
cover [2].
F-9-32
9.3.6.3 Removing the NCU
PCB (if equipped with fax
functions) 0006-9595
1) Disconnect all connectors form the NCU PCB [1].
2) Remove the 4 screws [2], and detach the NCU PCB
[1].
F-9-33
9.3.7 Modular Jack PCB
9.3.7.1 Removing the Left
Cover 0006-9687
1) Remove the screw [1], and detach the left cover [2].
F-9-34
9.3.7.2 Removing the Rear
Cover 0006-9593
1) Remove the 13 screws [1], and detach the rear
cover [2].
[2]
[1]
[2]
[1]
[1]
[1]
[2]
[1]
[2]
[2]
[1]