Service manual

Chapter 9
9-19
rear cover [2].
F-9-44
9) Free the harness [1] from the harness guide [2].
10) Remove the 7 screws [3], and detach the power
supply unit [4].
F-9-45
11) Disconnect the 3 connectors [1].
12) Remove the 4 screws [2], and detach the DC
controller PCB [3].
F-9-46
9.3.8.5 Removing the Power
Supply PCB 0006-9588
1) Remove the 5 screws [1], and detach the power
supply PCB [2].
F-9-47
When mounting the power supply unit, be sure not to
leave out the sensor flag [1] of the LGL paper sensor
from the rear of the sensor plate [2].
[2]
[1]
[1]
[4]
[3] [2]
[2]
[1]
[2]
[1]
[2]
[3]
[3]
[3]
[2]
[1]
[2]
[3]
[1][2]
[1]
[1]