Service manual

Chapter 9
9-20
F-9-48
9.3.9 Reader Unit Slide Detecting
Switch
9.3.9.1 Removing the Right
Cover 0006-9544
1) Slide the reader unit, and open the cartridge cover.
2) Open the manual feed tray.
3) Remove the 2 screws [1], and detach the right cover
[2].
F-9-49
9.3.9.2 Removing the Control
Panel 0006-9545
1) Slide the reader unit, and open the cartridge cover.
2) Remove the screw [1], and slide the control panel
[2] to the left.
F-9-50
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel slightly as shown when
disconnecting the connector [2].
F-9-51
MENO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
[1]
[2]
[2]
[1]
[1]
[1]
[2]
[2]
[1]