Service manual

Chapter 9
9-28
F-9-82
2) Remove the 11 screws [1], and detach the plate [2]
and the upper cover [3].
F-9-83
9.3.10.10 Removing the Printer
Controller PCB (if equipped
with printer functions) 0006-9539
9.3.10.11 Removing the NCU
PCB (if equipped with fax
functions) 0006-9540
1) Disconnect all connectors form the NCU PCB [1].
2) Remove the 4 screws [2], and detach the NCU PCB
[1].
F-9-84
9.3.10.12 Removing the
Modular Jack PCB (if
equipped with fax functions) 0006-9541
1) Disconnect the connector [1].
2) Remove the screw [2], and detach the modular jack
PCB [3].
F-9-85
9.3.10.13 Remove the Fan 0006-9542
1) Remove the 6 screws [1], and detach the plate [2].
[1][1]
[3]
[2]
[1]
[1]
[1]
[1]
[2]
[1]
[2]
[3]
[1]
[2]