Service manual

Chapter 9
9-30
F-9-91
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel slightly as shown when
disconnecting the connector [2].
F-9-92
MENO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
F-9-93
9.3.11.3 Removing the Front
Cover 0006-9511
1) Remove the cassette.
2) Remove the screw [1].
3) Free the 5 hooks [2], and detach the front cover [3].
F-9-94
9.3.11.4 Removing the Left
Cover 0006-9690
1) Remove the screw [1], and detach the left cover [2].
[1]
[2]
[2]
[1]
[1]
[2]
[2]
[2][3][1]