Service manual

Chapter 10
10-12
F-10-31
10.4.3.7 Removing the ADF
Motor Unit 0007-0397
1) Disconnect the 3 connectors [1].
2) Remove the E-ring [2] and the bushing [3].
3) Remove the 3 screws [4], and detach the ADF
motor unit [5].
The ADF motor is positioned using a special tool and,
therefore, cannot be adjusted in the field. Do not
remove the ADF motor from the motor base.
F-10-32
10.4.4 Feeding Outside Guide
10.4.4.1 Removing the Left
Cover 0007-0242
1) Remove the screw [1], and detach the left cover [2].
F-10-33
10.4.4.2 Removing the Rear
Cover 0007-0250
1) Remove the 13 screws [1], and detach the rear
cover [2].
F-10-34
10.4.4.3 Removing the Right
Cover 0007-0266
1) Slide the reader unit, and open the cartridge cover.
2) Open the manual feed tray.
3) Remove the 2 screws [1], and detach the right cover
[2].
[2] [1]
[3]
[4] [3] [5][1]
[4]
[1][2]
[2]
[1]
[2]
[1]
[1]
[1]