Service manual

Chapter 10
10-43
F-10-169
2) Remove the spring [1] and the hook [2], and detach
the white roller [3].
F-10-170
10.4.14.7 Removing the ADF
Motor Unit 0007-0485
1) Disconnect the 3 connectors [1].
2) Remove the E-ring [2] and the bushing [3].
3) Remove the 3 screws [4], and detach the ADF
motor unit [5].
The ADF motor is positioned using a special tool and,
therefore, cannot be adjusted in the field. Do not
remove the ADF motor from the motor base.
F-10-171
10.4.14.8 Removing the
Original Sensor 0007-0440
1) Free the 2 hooks [1], and detach the original sensor
[2].
F-10-172
10.4.15 Registration Sensor
10.4.15.1 Removing the Left
Cover
0007-0238
1) Remove the screw [1], and detach the left cover [2].
[1]
[2]
[2] [1]
[3]
[4] [3] [5][1]
[4]
[1][2]
[1]
[2]