Service manual

Chapter 10
10-52
4) Using a flat-blade screwdriver or the like, remove
the 2 covers [1]; then, using long nose pliers or the
like, remove the 2 pins [2].
F-10-208
5) Return the reader unit to its initial position.
6) Open the ADF.
7) Using a flat-blade screwdriver, remove the cover
[1].
8) Detach the ADF [2] from the host machine.
Take care so that no part will become trapped by
harness of the ADF.
F-10-209
10.4.18.5 Removing the ADF
Drive Unit 0007-0460
1) Holding the tab [1], detach the white plate [2].
F-10-210
2) Remove the 4 screws [1], and detach the ADF drive
unit [2].
F-10-211
10.4.18.6 Removing the
Feeding Outside Guide 0007-0459
1) Disconnect the connector [1], and detach the
grounding plate [2].
2) Remove the static eliminator [3] as much as shown.
[1]
[2]
[2]
[1]
[1]
[2]
[2][1]
[1]
[1]