Service manual

Chapter 13
13-27
T-13-91
T-13-92
13.2.1.8 Poor Finxing
13.2.1.8.1 The output has a fixing fault.
0006-4566
T-13-93
T-13-94
3) Is the surface of the transfer guide soiled with toner?
YES: Clean it.
Static eliminator
4) Is the static eliminator soiled with toner?
YES: Clean it.
Rollers (cassette pickup roller, vertical path roller, registration roller, transfer
charging roller, fixing pressure roller), Paper path
5) Is the problem noted at specific internals?
YES: Isolate the cause by referring to the table on "The output is
soiled", and clean it.
If the problem is not corrected, replace the part.
NO: Clean the paper path. If the problem cannot be corrected, replace
the part.
Paper
1) Try paper fresh out of package (newly opened). Is the problem
corrected?
YES: 1. The paper may be moist. Advise the user on the correct
method of storing paper.
2. Advise the user that the use of non-recommended paper
may not bring about the best results in terms of fixing.
Fixing pressure roller