Service manual

Chapter 13
13-49
T-13-182
T-13-183
T-13-184
13.2.6.2 Pickup Assembly (manual feed tray) 0006-4477
T-13-185
T-13-186
Connector (main motor)
13) Is the connection of the connector of the main motor unit and
the connector (J312) on the image processor PCB normal?
NO: Correct the connection.
Main motor
14) Try replacing the main motor. Is the problem corrected?
YES: End.
DC controller PCB, Image processor PCB
15) Try replacing the DC controller PCB. Is the problem
corrected?
YES: End.
NO: Replace the image processor PCB.
General conditions
1) Is the manual feed pickup roller rotating?
YES
:
Go through steps 2) to 6).
NO: Go to step 7).
Paper
2) Is the paper placed correctly?
NO: Place the paper correctly.