Service manual

Chapter 13
13-54
T-13-207
T-13-208
T-13-209
13.2.6.4 Fixing Delivery Assembly 0006-4507
T-13-210
8) Is LGL paper placed in the cassette?
YES
:
Go through steps 9) and 10).
NO: Check the jam sensor.
Side guide plate
9) Is the side guide plate of the cassette mounted correctly?
NO: Mount the side guide plate correctly. If scratched, replace it.
Sensor flag
10) Is the flag for the LGL paper sensor (PS101) damaged or
displaced?
YES
:
Correct it. If damaged, replace it.
NO: Replace the DC controller PCB.
Gear (in drive assembly; for registration roller, photosensitive drum, transfer
charging roller drive)
11) Is any of the gears in the drive assembly cracked or
damaged (used to drive the registration roller, photosensitive
drum, transfer charging roller)?
YES: Replace the damaged gear. If the gear on the photosensitive
drum
side is damaged, replace the cartridge.)
General conditions
1) Is the delivery roller rotating normally?