Service manual

Chapter 13
13-56
T-13-216
T-13-217
13.2.6.5 Checking the Rotation of the Rollers and Gears 0006-4512
If a jam occurs, go through the following to find out whether the rollers are rotating normally:
Checking the Rotation of the Cassette Pickup Roller and the Vertical Path Roller
1) Check to be sure that the machine is in standby state.
2) Open the right door.
3) Press the Start key.
4) Check the rotation of the roller through the right door area of the machine.
Checking the Rotation of the Registration Roller and the Gear for the Photosensitive Drum
1) Check to be sure that the machine is in standby state.
2) Slide the reader unit.
3) Open the copyboard cover, and remove the reader cover.
4) Open the cartridge cover.
5) Remove the cartridge.
6) While pressing the reader unit slide detecting switch (SW1) with a screwdriver, press the Start key.
7) Check the rotation of the roller/gear through the right side area of the machine.
- fixing pressure roller
- delivery roller
NO: Clean the soiled component. If scratched, replace it.
Delivery sensor
7) Check the delivery sensor. Is the problem corrected?
NO: Replace the delivery sensor.
Gear (in drive assembly; for fixing plessure roller, delivery roller drive)
8) Is any of the gears of the drive assembly (used to drive the
fixing pressure roller, delivery roller) cracked or damaged?
YES
:
Replace the damaged gear.