Service manual

Chapter 1
1-24
F-1-10
T-1-17
1.1.4 Maintenance by the User
1.1.4.1 Outline 0006-3815
The user is expected to perform the following so that the machine may be used in its best condition at all times.
1.1.4.2 Cleaning the Fixing Pressure Roller 0006-3819
If the faces or the backs of printed sheets show soiling in the form of black dots, clean the fixing pressure roller as
follows:
1) Place an A4 or larger sheet of plain paper in the manual feed tray.
2) Press the Additional Functions key, and hold down the Right Arrow key or the Left Arrow key until the LCD
indicates '6. ADJUST/CLEAN'.
3) Press the Set key.
4) Check to make sure that the LCD indicates '1. ROLLER CLEANING', and press the Set key. In response, the
machine will start cleaning the fixing pressure roller.
MEMO:
It takes about 3 min before the paper is delivered to the delivery tray after the cleaning of the fixing pressure roller
is started.
TX/RX NO:
4-digit indication
MODE: transmission, delayed transmission, or reception
DESTINATION TEL/ID: one-touch dial/speed dial number, abbreviation of other
party
PGS.: number of pages stored
SET TIME: date/time (in 24-hr notation)
ST. TIME: start of storage (in 24-hr notation)
0002
0002
0002
0002
1
1
1
1
DELAYED TX
DELAYED TX
MEMORY RX
MEMORY RX
07/30 13:51
07/30 13:51
07/30 13:53
07/30 13:54
13:59
13:51
-----
-----
07/30/2001 17:52 FAX 001
MEMORY FILES DELETED
TX/RX NO MODE DESTINATION TEL/ID
PGS. SET TIME ST. TIME
* ******************
*
*
*
*
*
**
*
*
*
*
*
*
*
* ******************
*
*
*
*
*
*
MEMORY CLEAR REPORT